Inclined Mounting - ABB PFEA 111 User Manual

F.5.2 Inclined Mounting
PFCL 201
F = T × [sin (
R
F
RT
F
Rtot
T × [sin (
T (Tension)
Wrap gain
Wrap gain
3BSE029380R0101 Rev C

F
RT
Tare
T
F
R
 
sin ( )]

= Tare × cos
= F + F =
R RT
 
sin ( )] + Tare × cos

= Wrap gain F
R
T T
= ------- - = ------------------------------------------------------------------ -
    
F T sin +
–
R
1
= --------------------------------------------------------- -
     
sin – + sin +
Tension Electronics PFEA111/112, User Manual
Sometimes it is necessary to mount the load cell on an

incline due to mechanical design constraints of the
machine or the need to have a proper force component
T
applied to the load cell.
In this case, the incline angle modifies the tare load and
the force components as shown.


    
sin +
 
Section F.5.2 Inclined Mounting
F-5