How To Use This Manual; Getting Started; Saving Actual Data And Settings At Commissioning - ABB PFEA 111 User Manual

Tension Electronics PFEA111/112, User Manual
Chapter 1 Introduction

1.4 How to Use this Manual

1.4.1 Getting Started

1.4.2 Saving Actual Data and Settings at Commissioning

1-2
This user manual comprises two main parts.
1. Information about the Tension Electronics:
- System and safety information (Chapter 1)
- Installation, commissioning, maintenance, operation and fault tracing (Chapters 2-6)
- Technical data (Appendix A)
2. Information about Designing the Load Cell Installation:
- Vertical-force sensing load cell PFCL 301E (Appendix B)
- Horizontal-force sensing load cell PFTL 301E (Appendix C)
- Radial-force Tensiometer PFRL 101 (Appendix D)
- Horizontal-force sensing load cell PFTL 101 (Appendix E)
- Vertical-force sensing load cell PFCL 201 (Appendix F)
- Horizontal-force sensing load cell PFTL 201 (Appendix G)
Each appendix contains detailed information about one of the above load cell types when
used in web tension systems with Tension Electronics PFEA111/112.
You can use the Fast Setup sequence to set up your system for basic measurement.
The Fast Setup guides you through a minimum number of steps to set up the tension electronics.
Perform the actions in the following sections:
• Section 3.6 Step-by-step Commissioning Guide
• Section 3.7 Performing Basic Settings
• Section 3.8 Performing a Fast Setup
For extended functionality, use "Performing a Complete Setup".
See Section 3.11 Performing a Complete Setup.
When commissioning is completed you can use the form in Appendix H, where actual
commissioning data and settings can be filled in and saved for future use.
3BSE029380R0101 Rev C