Siemens SINUMERIK 840D Description Of Functions page 7

11.03
The following table lists the main functions for SINUMERIK 840D/611 digital
added since 08.97 Edition:
Table 0-2
Serial no.
1
2
Documentation with
Edition date 05.00
The following functions added since 04.99 Edition are described in 05.00
Edition for SINUMERIK 840D/611 digital:
Table 0-3
Documentation with
Edition date 03.01
The following functions added since the 04.99 Edition are described in the
03.01 Edition for SINUMERIK 840D/611 digital:
Table 0-4
© Siemens AG 2003 All Rights Reserved
SINUMERIK 840D/SIMODRIVE 611 digital SINUMERIK Safety Integrated (FBSI) - Edition 11.03
Documentation with Edition date 04/99 describes the scope of functions of the
following products and SW versions:
SINUMERIK 840D/611 digital with software version 4.4.18
New functions described in 04/99 Edition
New functions in SINUMERIK 840D/611 digital, SW 4.4.18 and higher
External STOPs
Safe programmable logic (SPL)
Note
The documentation with Edition date 05.00 describes the scope of
functions of the following products and software version:
SINUMERIK 840D with software version 5.3
SIMODRIVE 611 digital with software version 5.1
New functions described in 05.00 Edition
Serial No. New functions in SINUMERIK 840D/611 digital
1 SPL expansions (Chapter 3)
2 Drive systems with slip (Chapter 3)
3 Setpoint velocity limiting (Chapter 3)
4 Engineering examples (Chapter 7), extended
5 Application examples (Chapter 8), extended
Note
The documentation with Edition date 03.01 describes the scope of
functions of the following products and software version:
SINUMERIK 840D with software version 6.1
SIMODRIVE 611 digital with software version 5.1.10
New functions described in 03.01 Edition
Serial No. New functions in SINUMERIK 840D/611 digital
1 SPL start without axial safety enable (Chapter 3)
2 New system variables (Chapter 3)
3 Actual value crosswise data comparison error (Chapter 3)
4 Additional machine data (Chapter 4)
5 Additional alarms (Chapter 6)
Foreword
vii