Siemens SINUMERIK 840D Description Of Functions page 315

11.03
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
© Siemens AG 2003 All Rights Reserved
SINUMERIK 840D/SIMODRIVE 611 digital SINUMERIK Safety Integrated (FBSI) - Edition 11.03
Upper limit value SE1. Enter equal MDs.
Lower limit value SE1. Enter equal MDs.
Upper limit value SE2. Enter equal MDs.
Lower limit value SE2. Enter equal MDs.
Safe cam 1+ (+tolerance). Enter equal MDs.
Safe cam 1+. Enter equal MDs.
Safe cam 1- (+tolerance). Enter equal MDs.
Safe cam 1-. Enter equal MDs.
Safe cam 2+ (+tolerance). Enter equal MDs.
Safe cam 2+. Enter equal MDs.
Safe cam 2- (+tolerance). Enter equal MDs.
Safe cam 2-. Enter equal MDs.
Safe cam 3+ (+tolerance). Enter equal MDs.
Safe cam 3+. Enter equal MDs.
Safe cam 3- (+tolerance). Enter equal MDs.
Safe cam 3-. Enter equal MDs.
Safe cam 4+ (+tolerance). Enter equal MDs.
Safe cam 4+. Enter equal MDs.
Safe cam 4- (+tolerance). Enter equal MDs.
Safe cam 4-. Enter equal MDs.
Position tolerance. Enter equal MDs.
Reference position tolerance. Enter equal MDs.
Time, speed changeover. Enter equal MDs.
Tolerance time SGE changeover. Enter equal MDs.
Delay time, pulse cancellation. Enter equal MDs.
Time to test the pulse cancellation. Enter equal MDs.
Transition time, STOP C to SBH. Enter equal MDs.
Transition time, STOP D to SBH. Enter equal MDs.
Transition time, STOP E to SBH. Enter equal MDs.
Stop response after SG. Enter equal MDs.
Stop response after SE. Enter equal MDs.
Shutdown speed after pulse cancellation. Enter equal MDs.
Data save test, stop response.
Actual position value + limit value SG1.
Actual position value - limit value SG1.
Actual position value + limit value SG2.
Actual position value - limit value SG2.
Actual position value + limit value SG3.
Actual position value - limit value SG3.
Actual position value + limit value SG4.
Actual position value - limit value SG4.
Standstill position + tolerance.
Standstill position - tolerance.
Actual position value "+ nx" + tolerance.
Actual position value "+ nx".
Actual position value "- nx".
Actual position value "- nx" + tolerance.
Actual stop request.
SG correction factor 1. Enter equal MDs.
SG correction factor 2. Enter equal MDs.
SG correction factor 3. Enter equal MDs.
SG correction factor 4. Enter equal MDs.
SG correction factor 5. Enter equal MDs.
SG correction factor 6. Enter equal MDs.
SG correction factor 7. Enter equal MDs.
SG correction factor 8. Enter equal MDs.
SG correction factor 9. Enter equal MDs.
SG correction factor 10. Enter equal MDs.
SG correction factor 11. Enter equal MDs.
SG correction factor 12. Enter equal MDs.
SG correction factor 13. Enter equal MDs.
6.1 Alarms for SINUMERIK 840digital
6 Alarms
6-315