Siemens SINUMERIK 840D Description Of Functions page 253

11.03
1395 $MD_SAFE_STOP_F_DIAGNOSIS
Diagnostics for STOP F
Unit: Default:
- 32 767
The fine diagnostics for the following alarms is displayed in this data:
for 840D Alarm 27001 "Defect in a monitoring channel"
for 611 digital
For error code = 1: Evaluate fine error coding in MDs 1391 and 1392
For error code = 2: Evaluate fine error coding in MD 1393 and 1394
For SINUMERIK 840D, the error code is output together with the alarm display.
1396 $MD_SAFE_ACKN_WRITE
User agreement
Unit: Default:
Hexadecimal 00 00
The user must input his agreement (acknowledgement) manually to change
over the axis from the "axis referenced" (IS) state to the "axis safely referenced"
(SGA) state. The user agreement does not have to be given when the axis is
referenced again provided that the comparison of the standstill position and the
"reference position", which is automatically made during power-up, produces a
positive result.
1397 $MD_SAFE_ACKN_READ
611 digital internal agreement
Unit: Default:
Hexadecimal 00 00
Indicates that an axis is in the "axis safely referenced" state after user
agreement has been issued.
1398 $MD_SAFE_ACT_CHECKSUM
Displays the checksum of the Safety Integrated machine data
Unit: Default:
00 00 00 00
The actual checksum calculated after POWER ON over the actual values of the
SI machine data is entered here.
© Siemens AG 2003 All Rights Reserved
SINUMERIK 840D/SIMODRIVE 611 digital SINUMERIK Safety Integrated (FBSI) - Edition 11.03
Minimum value: Maximum value:
0 32 767
Alarm 300911 "Defect in a monitoring channel"
Note
The error code for stop F is shown in detail in Alarm 27001.
Minimum value: Maximum value:
00 00 FFFF Hex
Bit 15 ... 0 Meaning
= 00AC Agreement set
= 0 Agreement not set
Minimum value: Maximum value:
00 00 FF FF
Bit 15 ... 0 Meaning
= 00AC Agreement set
= 0 Agreement not set
Minimum value: Maximum value:
00 00 00 00 FF FF FF FF
4 Data Descriptions
4.2 Machine data for SIMODRIVE 611 digital
Relevant for:
FD/MSD
Data type:
Short integer
Relevant for:
FD/MSD
Data type:
Binary
Relevant for:
FD/MSD
Data type:
Binary
Relevant for:
FD/MSD
Data type:
Long integer
611 digital
Becomes effective:
Immediate
611digital
Becomes effective:
Immediate
611digital
Becomes effective:
Immediate
611digital
Becomes effective:
Immediate
4-253