Requirements From The Ec Directives - Siemens SINUMERIK 840D Description Of Functions

11.03
2.1.2

Requirements from the EC Directives

The "EC Machinery Directive" and the "EC Individual Directive - Use of
equipment" define the basic protective goals. With their demands that are laid
down in national laws they commit the manufacturer and the machine user to
abide by these protective goals. With the CE mark and the declaration of
conformity, machine manufacturers show that they have implemented all
EC Directives relevant for their machines valid at this time.
Standards provide support and provide guidelines for implementation but unlike
EC Directives are not binding. If applied consistently, this provides a degree of
flexibility for innovative safety concepts. Standards generally reflect state-of-
the-art technology. However, on the other hand, innovative technical concepts
reflect the state of science and state-of-the-art technology. The state-of-the-art
and technology is then included in updated standards.
When implementing EC Directives, it is possible to deviate from the standards if
the same degree of safety can be achieved by another method. It is important
to provide proof of the achieved level of quality. This can be provided, for
example, in the form of an EC-type examination certificate.
Article 100 / 100a
EC contract
(internal market)
any other
applicable
guidelines
Harmonized
European standards
Manufacturer
Fig. 2-2 Requirements of the EC Directives (extract from /7/)
© Siemens AG 2003 All Rights Reserved
SINUMERIK 840D/SIMODRIVE 611 digital SINUMERIK Safety Integrated (FBSI) - Edition 11.03
2 General Information about Integrated Safety Systems
2.1 Drives and CNC controls with integrated safety
Machine protection
Outline proposal
Safety and health protection of employees
/89/391/EEC)
Separate directive
Machinery
directive
(98/37/EEC)
Article 118 / 118a
EC contract
(social security)
Any other
Use of
separate
equipement
directives
(89/655/EEC)
National legal
requirements
User
MASCHUTZ.DSF
2-27