Training And Support; Directives, Standards, Certificates - Siemens SINAMICS S120 Manual

Introduction

1.6 Directives, standards, certificates

1.5

Training and support

Training
You can find information on SITRAIN at the following address (http://www.siemens.com/sitrain).
SITRAIN offers training courses for products, systems and solutions in drive and automation
technology from Siemens.
Technical Support
To ask a technical question or create a support request, click on "Support Request" at the
following address (https://support.industry.siemens.com/cs/ww/en/sc) and select "Create
Request".
1.6 Directives, standards, certificates
Relevant directives and standards
You can obtain an up-to-date list of currently certified components on request from your local
Siemens office. If you have any questions relating to certifications that have not yet been
completed, please ask your Siemens contact person.
Certificates for download
The certificates can be downloaded from the Internet:
Certificates (https://support.industry.siemens.com/cs/ww/de/ps/13206/cert)
EC Declaration of Conformity
You can find the EC Declaration of Conformity for the relevant directives as well as the relevant
certificates, prototype test certificates, manufacturers declarations and test certificates for
functions relating to functional safety ("Safety Integrated") on the Internet at the following
address (https://support.industry.siemens.com/cs/ww/en/ps/13231/cert).
The following directives and standards are relevant for SINAMICS S devices:
• European Low Voltage Directive
SINAMICS S devices fulfil the requirements stipulated in the Low-Voltage Directive 2014/35/
EU, insofar as they are covered by the application area of this directive.
• European Machinery Directive
SINAMICS S devices fulfil the requirements stipulated in the Low-Voltage Directive 2006/42/
EU, insofar as they are covered by the application area of this directive.
However, the use of the SINAMICS S devices in a typical machine application has been fully
assessed for compliance with the main regulations in this directive concerning health and
safety.
18
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2