Directives And Standards - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

10.4

Directives and standards

RED Directive 2014/53/EU
The product is designed for use in industry.
Safety requirements
EMC standards
Efficient use of a spectrum
Further applicable standards
Assessment of electrical and electronic devices in respect of limitation of hazardous
materials:
• RoHS Directive 2011/65/EU
• EN50581 2012
The product meets the requirements if you observe the installation guidelines and safety
instructions provided in these operating instructions.
SIMOTICS CONNECT 400
Operating Instructions, 04/2023, A5E50161952B AL
Radio Equipment Directive 2014/53/EU
SIMOTICS CONNECT 400 complies with the Radio Equipment Directive 2014/53/EU. You can down‐
load the certificate at the following link:
Declaration of Conformity (https://support.industry.siemens.com/cs/ww/en/view/109771797)
The EC Declaration of Conformity is held on file available to the competent authorities at the fol‐
lowing address:
SIEMENS AG
Frauenauracher Str. 80
91056 Erlangen, Germany
SIMOTICS CONNECT 400 complies with the Radio Equipment Regulations UK SI 2017 No. 1206.
This equipment must be installed and operated at a minimum distance of 20 cm between the device
and users or bystanders.
This equipment must not be co-located or operated in conjunction with any other antenna or
transmitter.
10.4 Directives and standards
IEC 62368-1 :2018/COR1 :2020
EN IEC 62368-1 :2020+A11 :2020
DIN-EN IEC 62311:2020-12
EN 309 489-1 V2.2.3
EN 309 489-17 V3.2.4
EN 300 328 V2.2.2
Further information
209