Fib-Christie Link Video Mode; Frd-Frame Delay - Christie Boxer 30 Technical Reference

FIB–Christie Link Video Mode
Enables or disables the Christie Link video input.
Commands
Command Description
FIB+SLTA <0 | 1> Enables or disables the Christie Link video
input on the option card in slot 1.
When enabled, other inputs (on the HBMIC)
are inactive.
FIB+SLTB <0 | 1> Enables or disables Christie Link input on
the option card in slot 2.
When enabled, other inputs (on the HBMIC)
are inactive.
Examples
Disable Christie Link video input on the option card in slot 1:
(FIB+SLTA 0)
Enable Christie Link video input on the option card in slot 2:
(FIB+SLTB 1)
FRD–Frame Delay
Sets the delay between the input sync timing and the output sync timing.
The actual delay can vary based on the amount of processing applied to the image.
Commands
Command Description
FRD <delay> Sets the frame delay, measured in 1/1000ths of a frame (based on
the input frame rate). This command is only available if video
electronics are on. (Saved value)
FRD+STAT? Returns the actual frame delay in 1/1000ths of a frame. This value
may be higher than the required delay as the minimum allowed
delay differs for each of the various channel configurations. (Read-
only)
FRD+TIME? Returns a string representation of the actual frame delay, in
milliseconds. (Read-only)
Note: This representation in milliseconds is approximate and is for
reference only.
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
0 = Disables Christie Link video input
(Default)
1 = Enables Christie Link video input
0 = Disables Christie Link video input
(Default)
1 = Enables Christie Link video input
Values
1000 to 3000
2000 = 2 frames (Default)
—
—
32