Lmv-Lens Move - Christie Boxer 30 Technical Reference

LMV–Lens Move
Adjusts all aspects of the lens position using a single command.
Commands
Command
LMV <horizontal> <vertical>
<zoom> <focus>
LMV+HSTP <relative steps>
LMV+VSTP <relative steps>
LMV+FSTP <relative steps>
LMV+ZSTP <relative steps>
LMV+HRUN <-1 | 0 | 1>
LMV+VRUN <-1 | 0 | 1>
LMV+FRUN <-1 | 0 | 1>
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Moves the lens to an absolute
position as specified by each of
the four arguments.
Moves the horizontal motor a
relative number of steps.
Moves the vertical motor a
relative number of steps.
Moves the focus motor a relative
number of steps.
Moves the zoom motor a relative
number of steps.
Starts and stops the horizontal
motor.
Starts and stops the vertical
motor.
Starts and stops the focus
motor.
Serial API commands
Values
Minimum and maximum of each axis =
Dependent on the projector and the
installed lens
Maximum horizontal range = -1600 to 1600
Maximum vertical range = -1600 to 1600
negative steps = Moves the display left
positive steps = Moves the display right
The maximum absolute value is dictated by
the current location of the motor and the
range of the axis (see the LMV command
above).
negative steps = Moves the display down
positive steps = Moves the display up
The maximum absolute value is dictated by
the current location of the motor and the
range of the axis (see the LMV command
above).
negative steps = Focuses outward
positive steps = Focuses inward
The maximum absolute value is dictated by
the current location of the motor and the
range of the axis (see the LMV command
above).
negative steps = Makes the display smaller
positive steps = Makes the display larger
The maximum absolute value is dictated by
the current location of the motor and the
range of the axis (see the LMV command
above).
-1 = Moves the display left
0 = Stops the motor
1 = Moves the display right
-1 = Moves the display down
0 = Stops the motor
1 = Moves the display up
-1 = Moves the display outward
0 = Stops the motor
40