Edo-Edid Override - Christie Boxer 30 Technical Reference

Commands
Command Description
EBL+SLCT?L Retrieves a list of available edge blends.
(Read-only)
EBL+SLCT <value> Selects the edge blend to use on the
projector. This command is only available if
video electronics are on. (Saved value)
Examples
Turn off edge blending:
(EBL+SLCT 0)
Retrieve a list of edge blends:
(EBL+SLCT?L)
Select the second edge blend from the list of available blends:
(EBL+SLCT 2)
EDO–EDID Override
Configures which EDID is presented using inputs that support EDIDs (such as DisplayPort, HDMI, DVI,
and so on).
Use this command to configure what Boxer 30 advertises regarding the type of signals it accepts. This
command does not need to be set to accept a particular type of signal.
Commands
Command Description
EDO <rate> Defines the expected frame rate regardless of the
active window size of the signal. This command is
only available if video electronics are on. (Saved
value)
Examples
Define the expected frame rate to be 24:
(EDO 24)
Define the expected frame rate to be 60:
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
—
0 = Turns off edge blending
1 to 4 = Selects one of the four edge
blends, if available
11 = Selects basic edge blending (onboard
edge blending)
Values
24
25
30
48
50
60 (Default)
27