Loe-Video Loop Out Enable; Lop-Lamp Selection - Christie Boxer 30 Technical Reference

Command Description
Examples
Get the language:
(LOC+LANG?)
Result:
(LOC+LANG!001)
Set the language to French:
(LOC+LANG 1)
Set the temperature to Fahrenheit:
(LOC+TEMP 1)
LOE–Video Loop Out Enable
Enables or disables video loop out on the THIC, 3GIC, and TDPIC cards.
Commands
Command Description
LOE <0 | 1> Enables or disables video loop out. This
command is only available if video
electronics are on and it only applies to
option cards that have loop out. (Saved
value)
Examples
Disable video loop out:
(LOE 0)
Enable video loop out:
(LOE 1)
LOP–Lamp Selection
Selects a lamp to turn on or off while in limited power mode.
If LOP or LOP+MULT try to enable any lamps that are not installed, the command fails.
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
1 = Fahrenheit
Values
0 = Disables video loop out
1 = Enables video loop out (Default)
42