Connecting Christie Link Video Source - Christie Griffyn 4K32-RGB Installation And Setup Manual

Two-port 3D
The following two-port 3D DisplayPort image formats are supported in a 3D frame sequential, two-
column transmission format. All frame rates are expressed per eye.
Format Cables Hres
4K 1920x2160 2
(per input)
2048x2160 2
(per input)
One-port 2D PC
The following one-port 2D DisplayPort 2.0 PC image formats are supported on each of the two
DisplayPort inputs.
Format Cables
PC 1280x800 1
1280x960 1
1280x1024 1
1440x900 1
1680x1050 1
1600x1200 1
1920x1200 1

Connecting Christie Link video source

For the projector to accept digital video data from Christie Link, plug the source directly into the Video
Input panel.
These input configurations are set up on the Christie Link transmitter. Refer to the Christie Link User
Guide (P/N: 020-102234-XX).
Christie Link video loop-out enables signals received on the Christie Link input (labeled Christie Link 1
on the Video Input panel) to be passed through to the Christie Link output (labeled Christie Link 2 on
the Video Input panel). The loop through connection is automatically established whenever active
Christie Link QSFP modules are plugged into the respective connectors on the projector's Video Input
panel.
Input configuration
One-Port
One-Port, Dual-Input 3D
Two-Port
Griffyn 4K32-RGB Installation and Setup Guide
020-103314-05 Rev. 1 (04-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Connecting devices and establishing communication
Vres Frame rate
(Hz)
3840 2160 60
4096 2160 60
Hres Vres
1280 800
1280 960
1280 1024
1440 900
1680 1050
1600 1200
1920 1200
Description
Enables connection of Christie Link 4K transmitter to the projector.
Sampling
Y'C' C'
B
Y'C' C'
B
Frame rate Sampling
(Hz)
60 RGB
60 RGB
60 RGB
60 RGB
60 RGB
60 RGB
60 RGB
Bit-depth
/RGB/4:4:4 8/10bpc
R
/RGB/4:4:4 8/10bpc
R
Bit-depth
8bpc
8bpc
8bpc
8bpc
8bpc
8bpc
8bpc
55