Szp-Size And Position - Christie Boxer 30 Technical Reference

Command Description
STH+MODE <0 | 1> Enables or disables the Stealth mode. When
Stealth mode is enabled, the status and
shutter LEDS are turned off and the
heartbeat feature on the display panel
Enter key is disabled.
Examples
Disable Stealth mode:
(STH+MODE 0)
Enable Stealth mode:
(STH+MODE 1)
SZP–Size and Position
Changes the aspect ratio of the display.
By default, the projector maintains the aspect ratio and scale to either full width or full height
(whichever edge is reached first). 16:9 content is scaled to full height with pillar boxes.
Commands
Command Description
SZP <value> Changes the aspect ratio of the display. This
command is only available if video
electronics are on. (Saved value)
Examples
Allow the projector to determine when to scale video:
(SZP 0)
Disable scaling the video:
(SZP 1)
Stretch the video horizontally:
(SZP 3)
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
0 = Disables Stealth mode (Default)
1 = Enables Stealth mode
Values
0 = Allows the projector to determine when to
scale video (Default)
1 = None
2 = Full size (stretch horizontally and vertically)
3 = Full width (stretch horizontally)
4 = Full height (stretch vertically)
58