Communicating with
Boxer 30
Understand the information and procedures for communicating with Boxer 30 from a remote location.
You can communicate with the projector through the RS232 IN port or the Ethernet port. When
connecting the projector to a computer, use a direct connection. Docking ports can cause software
upgrade failures.
Product documentation
For installation, setup, and user information, see the product documentation available on the Christie
Digital Systems USA Inc. website. Read all instructions before using or servicing this product.
Boxer 4K, Boxer 2K, Boxer 30
1. Access the documentation from the Christie website:
•
Go to http://bit.ly/2mpf6QK or
https://www.christiedigital.com/en-us/business/products/projectors/3-chip-dlp/boxer-
series
•
Scan the QR code using a QR code reader app on a smartphone or tablet.
2. On the product page, select the model and switch to the Downloads tab.
Related documentation
Additional information on the projector is available in the following documents.
•
Boxer 30 Installation and Setup Guide (P/N: 020-102017-XX)
•
Boxer 30 User Guide (P/N: 020-102016-XX)
•
Boxer Product Safety Guide (P/N: 020-101780-XX)
•
Boxer 4K Service Guide (P/N: 020-101699-XX)
•
Boxer 30 Status System Guide (P/N: 020-102233-XX)
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
6