Itp-Test Pattern - Christie Boxer 30 Technical Reference

Command Description
Examples
Return the list of all lamps that have been installed in the projector:
(HIS?)
Result:
(HIS!0000 "2015/05/19 09:37:50" "New_May15" "" 0094 0000 0000 0000 0153)
(HIS!0001 "2015/04/27 15:03:10" "NewA2_Mar30" "" 0343 0000 0000 0505 0513)
...
(HIS!0049 "2015/02/12" "Lamp4" "" 0000 0000 0000 0004 0000)
Return the list of entries in the Lamp A1 Lamp Memory Module:
(HIS+LMP1?)
Result:
(HIS+LMP1!0000 "2015/05/19 09:37:50" "New_May15" "" 0094 0000 0000 0000 0153)
ITP–Test Pattern
Displays a test pattern.
Commands
Command Description
ITP <index> Enables or disables test patterns.
This command is only available if video electronics are
on.
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
total lamp hours = Total number of hours
(including the pre-installation hours) that
the lamp has been on
Values
0 = Off (Default)
1 = Grid
2 = Grey Scale 16
3 = Flat White
4 = Flat Grey
5 = Flat Black
6 = Checker
7 = 17 Point
8 = Edge Blend
9 = Color Bars
10 = Multi Color
11 = RGBW Ramp
12 = Horizontal Ramp
13 = Vertical Ramp
14 = Diagonal Ramp
15 = Square Grid
36