Christie Boxer 30 Technical Reference page 37

Command Description
ITP+FREQ <value> Sets the frequency at which the internal test patterns
are displayed.
This command is only available if video electronics are
on.
ITP+GRDC <0 | 1> Enables multi-color or white-on-black grids for the
Square Grid or Diagonal Grid test patterns.
This command is only available if video electronics are
on.
ITP+GRDM <0 | 1> Enables moving or static grid for the Square Grid or
Diagonal Grid test patterns.
This command is only available if video electronics are
on.
ITP+GRDP <pitch> Defines the spacing between lines used for the Square
Grid and Diagonal Grid test patterns.
This command is only available if video electronics are
on.
ITP+GREY <grey Defines the shade of grey for the Flat Grey test pattern.
level>
This command is only available if video electronics are
on.
ITP+RMPL <grey Defines the starting (top/left) grey-level used for the
level> Horizontal Ramp, Vertical Ramp, and Diagonal Ramp
test patterns.
This setting has no effect when the ramp is moving
(such as ITP+RMPM is non-zero).
This command is only available if video electronics are
on.
ITP+RMPM <speed> Defines the motion speed used for the Horizontal Ramp,
Vertical Ramp, and Diagonal Ramp test patterns.
This command is only available if video electronics are
on.
ITP+RMPS <slope> Defines the slope used for the Horizontal Ramp, Vertical
Ramp, and Diagonal Ramp test patterns.
This command is only available if video electronics are
on.
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
16 = Diagonal Grid
17 = Maximum Activity
18 = Prism/Convergence
21 = Boresight
22 = Convergence
23 = Integrator Rod
25 = Resolution Demo
24 to 500
60 (Default)
0 = White-on-black
1 = Multi-color (Default)
0 = Static (Default)
1 = Moving
2 to 127
32 (Default)
0 to 4095
2048 (Default)
0 to 4095
0 (Default)
0 to 100
0 (Default)
1 to 5
1 (Default)
37