Configuring Crimson To Work With Christie Link - Christie Crimson Series Installation And Setup Manual

2. Open the Service door on the side of the projector.
3. To adjust the convergence knobs, use the 3 mm tool included with the projector.
If adjusting by hand without using the tool, pull out the convergence adjustment knobs to
engage them.
4. Use the Convergence test pattern to assist with adjusting the horizontal and vertical lines.
Vertical convergence and rotation is done by adjusting two knobs. Christie recommends
rotating a single knob a maximum of a quarter rotation before adjusting the second knob a
quarter rotation. For example, if using one hand, turn the left knob a quarter rotation and then
the right knob a quarter rotation, and so on. Adjusting a single knob for vertical or rotational
adjustment to an extreme before adjusting the second knob may result in the convergence
mechanism binding.
5. When complete, push in all the convergence adjustment knobs to disengage the knobs.

Configuring Crimson to work with Christie Link

Configure Crimson to work with Christie Link, which provides a fully integrated fiber solution for long
range video transport.
1. Turn on Crimson.
2. Verify the HBMIC has been installed in slot 0.
3. To enable the Christie Link option for slot 1, select MENU > Configuration > Input
Settings > Enable Christie Link (Slot 1).
4. To enable the Christie Link option for slot 2, select MENU > Configuration > Input
Settings > Enable Christie Link (Slot 2).
5. Select Enter.
6. Select the QSFP+ option as the input setting.
a) From the side panel home page, select Input.
b) On the Input selection page, select the appropriate input marked Christie Link.
More than one input source may be listed as Christie Link, depending on how many
signals are being sent from Christie Link. For example, 1-1, 2-1, and so on, where the first
number in the sequence is the slot number (slot 1 or slot 2).
Related information
Turning on the projector (on page 25)
Crimson Installation and Setup Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25
020-102647-07 Rev. 1 (12-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Installation and setup
34