Eme-Enable Asynchronous Serial Messages; Etp-Engine Test Pattern - Christie Boxer 30 Technical Reference

(EDO 60)
EME–Enable Asynchronous Serial Messages
Enables or disables the asynchronous serial messages that the projector occasionally transmits.
Commands
Command Description
EME <0 | 1> Enables or disables asynchronous serial
messages. (Saved value)
Examples
Disable all asynchronous serial messages:
(EME 0)
Enable all asynchronous serial messages:
(EME 1)
ETP–Engine Test Pattern
Enables or disables the engine diagnostic test patterns.
Commands
Command Description
ETP <index> Enables the engine diagnostic test
patterns, indicated by the <index>
parameter. This command is only
available if video electronics are on.
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
0 = Disables all asynchronous FYI/ERR
serial messages
1 = Enables asynchronous FYI/ERR serial
messages (Default)
Values
0 = Flat Black
1 = Green
2 = Red
3 = Blue
4 = White
5 = 8x8 Green Checker
6 = 8x8 Red Checker
7 = 8x8 Blue Checker
8 = 8x8 White Checker
9 = Convergence Border & Cross (Green)
10 = Convergence Border & Cross (Red)
11 = Convergence Border & Cross (Blue)
12 = Convergence Border & Cross (White)
13 = Convergence Border & Cross (Multi-color)
28