Edo-Edid Override - Christie Mirage SST Technical Reference

Examples
Turn off edge blending:
(EBL+SLCT 0)
Retrieve a list of edge blends:
(EBL+SLCT?L)
Select the second edge blend from the list of available blends:
(EBL+SLCT 2)
EDO–EDID Override
Configures which EDID is presented using inputs that support EDIDs (such as DisplayPort, HDMI, DVI,
and so on).
Use this command to configure what Mirage SST advertises regarding the type of signals it accepts.
This command does not need to be set to accept a particular type of signal.
Commands
Command Description
EDO <rate> Defines the expected frame rate regardless of the
active window size of the signal. This command is
only available if video electronics are on. (Saved
value)
Examples
Define the expected frame rate to be 24:
(EDO 24)
Define the expected frame rate to be 60:
(EDO 60)
Mirage SST Technical Reference–Serial Commands
020-103005-03 Rev. 1 (01-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
24
25
30
48
50
60 (Default)
120
Below licenses are only available if the
Mirage license is applied and HFR
mode is applied:
240
360
480
29