Edo-Edid Override; Eme-Enable Asynchronous Serial Messages; Etp-Engine Test Pattern - Christie Boxer 4K Technical Reference

EDO–EDID Override
Configures which EDID is presented using inputs that support EDIDs (such as DisplayPort, HDMI, DVI,
and so on).
Use this command to configure what Boxer 4K advertises regarding the type of signals it accepts. This
command does not need to be set to accept a particular type of signal.
Commands
Command Description
EDO <rate> Defines the expected frame rate regardless of the
active window size of the signal. This command is
only available if video electronics are on. (Saved
value)
EDO+COLM <value> Defines the expected active window size of the
incoming signal. This command is only available if
video electronics are on. (Saved value)
EME–Enable Asynchronous Serial Messages
Enables or disables the asynchronous serial messages that the projector occasionally transmits.
Commands
Command Description
EME <0 | 1> Enables or disables asynchronous serial
messages. (Saved value)
ETP–Engine Test Pattern
Enables or disables the engine diagnostic test patterns.
Commands
Command Description
ETP <index> Enables the engine diagnostic
test patterns, indicated by the
<index> parameter. This
Boxer 4K Serial API Commands Technical Reference
020-101697-05 Rev. 1 (07-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Values
24
25
30
48
50
60 (Default)
0 = Auto Detect (Default)
1 = 4K—Columns 2x1
2 = 4K—Columns 4x1
3 = 4K - Quadrants 2x2
Values
0 = Disables all asynchronous FYI/ERR
serial messages
1 = Enables asynchronous FYI/ERR serial
messages (Default)
Values
0 = Flat Black
1 = Green
Serial API commands
23