General Instructions - Festo Compact Performance CP-FB6-E Manual

1. Installation

1.1 General instructions

WARNING
Before starting installation or maintenance work,
switch off the following:
• the compressed air supply
• the operating voltage on the field bus node
• the power supply to the
You thereby avoid:
– uncontrolled movements of loose tubing.
– unintentional movements of the connected
– undefined switching states of the electronic
CAUTION
The node of the CP system contains electrostatically
vulnerable components.
• Do not, therefore, touch any components.
• Please observe the regulations for dealing
In this way you will avoid irreparable damage to the
electronic components on the node.
General information on the installation of the CP as-
semblies can be found in the manual "CP system".
CP FB6-E 9809c
(pins 1 and 2)
CP output modules
actuators.
components.
with electrostatically vulnerable components.
1-3