Using The System; Powering System On - Brainlab Curve Dual Navigation Station System User's Manual

USING THE SYSTEM

6 USING THE SYSTEM
6.1

Powering System On

Power Components
The power components are located on the user panel (see page 47).
No.
①
②
③
④
Power Supply
Operate system using the power source indicated on type plate. If you are unsure of type
of power available, consult Brainlab support or your local power company. Using the
wrong power source could seriously damage system.
Check voltage setting before plugging mains power cable into wall outlet.
Only establish or interrupt an electrical connection when all associated devices are fully
turned off.
Only operate the system using the mains power cable provided with the system.
System User Guide Rev. 1.0 Curve Dual Navigation Station Ver. 1.2
① ②
Component
On/off button
Power LED
Mains power LED
Mains power switch
③
Figure 46
④
See
Page 96
Page 54
Page 54
Page 96
95