Brainlab Curve Dual Navigation Station System User's Manual page 120

Transporting the System
Steps
2.
3.
4.
Post-Transport
Do not transport or store the system outside of the environmental conditions specified in
the Technical User Guide. Failure to do so may cause the camera to lose its calibration
accuracy.
After transporting, wait until the system has adjusted to room temperature before
operating.
120
Pull the Camera Cart to the point of depth variation, then carefully lift the handle while
pulling it over the step.
NOTE: Be careful not to lift the cart so much that it tips over.
Pull the Monitor Cart to the point of depth variation, then carefully lift the handle while
pulling it over the step.
NOTE: Be careful not to lift the cart so much that it tips over.
Re-dock carts (see page 115) before continuing with transportation.
System User Guide Rev. 1.0 Curve Dual Navigation Station Ver. 1.2