Docking Camera and Monitor Carts
7.2
Docking Camera and Monitor Carts
7.2.1
Before You Begin
General Information
The monitor and camera protection covers must be used during docking, transport and storage to
protect the sensitive components from damage.
To avoid damage, place protection covers over monitors and camera before docking,
transport or storage.
Do not cover camera or monitors with protection covers when system is running.
Otherwise system could overheat and be seriously damaged. Ensure that system has been
turned off and is completely cooled down before applying the protection covers.
Disconnect camera from Monitor Cart.
Clean touchscreens before applying the monitor protection covers (see page 127).
Monitor Cover (Front)
108
Figure 52
System User Guide Rev. 1.0 Curve Dual Navigation Station Ver. 1.2