Host Bridge; Bios Menu 13:Host Bridge Configuration; Initiate Graphic Adapter - IEI Technology ECW-281B-D525 User Manual

5.4.1 Host Bridge

Use the Host Bridge menu (
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Chipset
> OnChip VGA Configuration

Initiate Graphic Adapter

******* Memory Information ********
Memory Frequency
Total Memory
DIMM#0
DIMM#1
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.

BIOS Menu 13:Host Bridge Configuration


Initiate Graphic Adapter
Use the Initiate Graphic Adapter option to select the graphics controller used as the
primary boot device. Select either an integrated graphics controller (IGD) or a combination
of PCI graphics controller, a PCI express (PEG) controller or an IGD. Configuration
options are listed below:
 IGD
 PCI/IGD
Page 70
ECW-281B/B2-D525 Embedded System
B IOS Menu 13) to configure the host bridge chipset.
5
[IGD]
800 Mhz
2048 MB
2048 MB
Not present
D
EFAULT
Config On Chip VGA
Settings
---------------------
: Select Screen
 : Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit