Enhanced
Configure SATA as [IDE]
Use the Configure SATA as option to configure SATA devices as normal IDE devices.
IDE
AHCI
5.3.4 USB Configuration
Use the USB Configuration menu (
and configure the USB settings.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
USB Configuration
USB Devices:
1 Keyboard, 2 Hubs
Legacy USB Support
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 6: USB Configuration
Page 58
ECW-281B/B2-D525 Embedded System
Configures the on-board ATA/IDE controller to be in
D
EFAULT
Enhanced mode. In this mode, IDE channels and SATA
channels are separated. This mode supports up to 6
storage devices. Some legacy OS do not support this
mode.
Configures SATA devices as normal IDE device.
D
EFAULT
Configures SATA devices as normal AHCI device.
B IOS Menu 6) to read USB configuration information
5
[Enabled]
Enables Legacy USB
support. AUTO option
disables legacy support
if no USB devices are
connected. DISABLE
option will keep USB
devices available only
for EFI applications.
---------------------
: Select Screen
: Select Item
Enter Select
F1
General Help
F2
Previous Values
F3
Optimized
Defaults
F4
Save
ESC
Exit