More Troubleshooting; Component Replacement Procedure - IEI Technology ECW-281B-D525 User Manual

6.2.3 More Troubleshooting

 Nothing appears on the monitor after booting up the system: Make sure
the monitor is properly connected to the system and the monitor is connected
to a power supply and turned on.
WARNING!
If all troubleshooting measures have been taken and the system still
fails to start, contact the IEI reseller or vendor you purchased the
ECW-281B/B2-D525 from or contact an IEI sales representative
directly. To contact an IEI sales representative, please send an email
to s ales@iei.com.tw.
3 2 1

6.3 Component Replacement Procedure

WARNING!
Users are not advised to attempt to repair or replace any internal or
external components of the ECW-281B/B2-D525 embedded system
other than those listed below. If any other components fail or need
replacement, contact the IEI reseller or vendor you purchased the
ECW-281B/B2-D525 from or contact an IEI sales representative
directly. To contact an IEI sales representative, please send an email
to s ales@iei.com.tw.
3 2 1
The embedded system components listed below can all be replaced if they fail:
 SO-DIMM module
 Internal hard disk drive (see Section
Page 82
ECW-281B/B2-D525 Embedded System
4 .2.5)
8 6 5