Figure 4-14: Din Rail Mounting Bracket; Figure 4-15: Screw Locations - IEI Technology ECW-281B-D525 User Manual

ECW-281B/B2-D525 Embedded System
Attach the DIN rail mounting bracket to the bottom panel of the embedded
Step 1:
system. Secure the bracket to the embedded system with the supplied retention
screws (
F igure 4-14).
7 6 4

Figure 4-14: DIN Rail Mounting Bracket

Make sure the inserted screw in the center of the bracket is at the lowest
Step 2:
position of the elongated hole (

Figure 4-15: Screw Locations

Place the DIN rail flush against the back of the mounting bracket making sure
Step 3:
the edges of the rail are between the upper and lower clamps (
F igure 4-15).
7 6 4
F igure 4-16).
7 6 4
Page 45