So-Dimm Replacement; Figure 6-1: So-Dimm Installation - IEI Technology ECW-281B-D525 User Manual

ECW-281B/B2-D525 Embedded System

6.3.1 SO-DIMM Replacement

WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the ECW-281B/B2-D525. Please make sure the purchased SO-DIMM
complies with the memory specifications of the ECW-281B/B2-D525.
To replace a SO-DIMM memory module into a SO-DIMM socket, please follow the steps
below.
Remove the bottom surface panel. Place the ECW-281B/B2-D525 on an
Step 1:
anti-static pad with the bottom panel facing up and the bottom surface removed.
(see Section
Locate the SO-DIMM on the motherboard.
Step 2:
Remove the SO-DIMM by releasing the arms on the SO-DIMM socket.
Step 3:
Align the new SO-DIMM with the socket. The SO-DIMM must be oriented in
Step 4:
such a way that the notch in the middle of the SO-DIMM must be aligned with
the plastic bridge in the socket (
Insert the SO-DIMM. Push the SO-DIMM chip into the socket at an angle
Step 5:
(
F igure 6-1).
8 6 5

Figure 6-1: SO-DIMM Installation

4 .2.3).
8 6 5
F igure 6-1).
8 6 5
Page 83