Ecw-281B/B2-D525 System Maintenance Overview; System Troubleshooting; The System Doesn't Turn On - IEI Technology ECW-281B-D525 User Manual

WARNING:
Take Anti-Static precautions whenever maintenance is being carried out on the
system components. Failure to take anti-static precautions can cause
permanent system damage. For more details on anti-static precautions, please
refer to Section

6.1 ECW-281B/B2-D525 System Maintenance Overview

NOTE:
When doing maintenance operations on the system, please follow the
instructions in this chapter. Failure to follow these instructions may lead to
personal injury and system damage.
To preserve the working integrity of the ECW-281B/B2-D525 embedded system, the
system must be properly maintained. If embedded system components need replacement,
the proper maintenance procedures must be followed to ensure the system can continue
to operate normally.

6.2 System Troubleshooting

This section provides some simple troubleshooting suggestions.

6.2.1 The System Doesn't Turn On

If after turning the system on, there is no power (indicated by the power button on the front
panel not turning on) please do the following:
Check that the power cable connector is properly connected to the terminal
Step 1:
block or power socket on the system front panel.
Check that the power cable connector is properly plugged into the power source.
Step 2:
Make sure the power button is turned on.
Step 3:
Page 80
ECW-281B/B2-D525 Embedded System
4 .1.
8 6 5