Serial Port N Configuration; Bios Menu 8: Serial Port N Configuration Menu; Serial Port [Enabled]; Change Settings [Auto] - IEI Technology ECW-281B-D525 User Manual

5.3.5.1 Serial Port n Configuration

Use the Serial Port n Configuration menu (
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
Serial Port 1 Configuration
Serial Port
Device Settings
Change Settings
Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.

BIOS Menu 8: Serial Port n Configuration Menu

5.3.5.1.1 Serial Port 1 Configuration


Serial Port [Enabled]

Use the Serial Port option to enable or disable the serial port.

Disabled

Enabled


Change Settings [Auto]

Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto

IO=3F8h;
IRQ=4
Page 60
ECW-281B/B2-D525 Embedded System
B IOS Menu 8) to configure the serial port n.
5
[Enabled]
IO=3F8h; IRQ=4
[Auto]
Disable the serial port
Enable the serial port
D
EFAULT
The serial port IO port address and interrupt address
D
EFAULT
are automatically detected.
Serial Port I/O port address is 3F8h and the interrupt
address is IRQ4
Enable or Disable Serial
Port (COM)
---------------------
: Select Screen
 : Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit