ECW-281B/B2-D525 Embedded System
3.1 Embedded System Motherboard
NOTE:
The jumpers and connectors shown in the section below are those jumpers
and connectors that are relevant to the configuration and installation of the
embedded system. For a complete list of jumpers and connectors on the
WAFER-PV-D5252 motherboard, please refer to the WAFER-PV-D5252 user
manual.
The ECW-281B/B2-D525 models have a WAFER-PV-D5252 motherboard installed in the
system. The following sections describe the relevant connectors and jumpers on the
motherboard.
3.1.1 WAFER-PV-D5252 Motherboard Overview
The locations of the WAFER-PV-D5252 jumpers and connectors used on the
ECW-281B/B2-D525 are shown in
Figure 3-1: WAFER-PV-D5252 Jumper and Connector Locations
F igure 3-1 below.
6 5 4
Page 15