Introduction; Starting Setup; Using Setup - IEI Technology ECW-281B-D525 User Manual

ECW-281B/B2-D525 Embedded System

5.1 Introduction

The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to
certain system settings. This chapter outlines the options that can be changed.

5.1.1 Starting Setup

The UEFI BIOS is activated when the computer is turned on. The setup program can be
activated in one of two ways.
1. Press the
2. Press the
the screen.
If the message disappears before the F2 key is pressed, restart the computer and try
again.

5.1.2 Using Setup

Use the arrow keys to highlight items, press E
PageDown keys to change entries, press F1 for help and press E
keys are shown in.
Key Function
Up arrow Move to the item above
Down arrow Move to the item below
Left arrow Move to the item on the left hand side
Right arrow Move to the item on the right hand side
+ Increase the numeric value or make changes
- Decrease the numeric value or make changes
Page up Move to the next page
Page down Move to the previous page
key as soon as the system is turned on or
F2
key when the "Press F2 to enter SETUP" message appears on
F2
0.
to select, use the PageUp and
NTER
to quit. Navigation
SC
Page 51