Change Settings [Auto]; Serial Port [Enabled] - IEI Technology ECW-281B-D525 User Manual


Enabled


Change Settings [Auto]

Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto

IO=3E8h;
IRQ=11

IO=3E8h;
IRQ=10, 11

IO=2E8h;
IRQ=10, 11
5.3.5.1.4 Serial Port 5 Configuration


Serial Port [Enabled]

Use the Serial Port option to enable or disable the serial port.

Disabled

Enabled

Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto
Page 62
ECW-281B/B2-D525 Embedded System
Enable the serial port
D
EFAULT
The serial port IO port address and interrupt address
D
EFAULT
are automatically detected.
Serial Port I/O port address is 3E8h and the interrupt
address is IRQ11
Serial Port I/O port address is 3E8h and the interrupt
address is IRQ10, 11
Serial Port I/O port address is 2E8h and the interrupt
address is IRQ10, 11
Disable the serial port
Enable the serial port
D
EFAULT
The serial port IO port address and interrupt address
D
EFAULT
are automatically detected.