Getting Help; Unable To Reboot After Configuration Changes; Bios Menu Bar; Table 5-1: Bios Navigation Keys - IEI Technology ECW-281B-D525 User Manual

Key Function
Esc Main Menu – Quit and do not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu --
Exit current page and return to Main Menu
F1 General help, only for Status Page Setup Menu and Option
Page Setup Menu
F9 Load optimized defaults
F10 Save changes and Exit BIOS

Table 5-1: BIOS Navigation Keys

5.1.3 Getting Help

When F1 is pressed a small help window describing the appropriate keys to use and the
possible selections for the highlighted item appears. To exit the Help Window press E
the F1 key again.

5.1.4 Unable to Reboot After Configuration Changes

If the computer cannot boot after changes to the system configuration is made, CMOS
defaults. Use the jumper described in Chapter 4.

5.1.5 BIOS Menu Bar

The menu bar on top of the BIOS screen has the following main items:
 Main – Changes the basic system configuration.
 Advanced – Changes the advanced system settings.
Chipset – Changes the chipset settings.

Boot – Changes the system boot configuration.

 Security – Sets User and Supervisor Passwords.
 Save & Exit – Selects exit options and loads default settings
The following sections completely describe the configuration options found in the menu
items at the top of the BIOS screen and listed above.
Page 52
ECW-281B/B2-D525 Embedded System
or
SC