Figure 4-12: Wall-Mounting Bracket - IEI Technology ECW-281B-D525 User Manual

ECW-281B/B2-D525 Embedded System
Carefully mark the locations of the four bracket screw holes on the wall.
Step 2:
Drill four pilot holes at the marked locations on the wall for the bracket retention
Step 3:
screws.
Align the wall-mounting bracket screw holes with the pilot holes.
Step 4:
Secure the mounting-bracket to the wall by inserting the retention screws into
Step 5:
the four pilot holes and tightening them (

Figure 4-12: Wall-mounting Bracket

Insert the four monitor mounting screws provided in the wall mounting kit into the
Step 6:
four screw holes on the bottom panel of the system and tighten until the screw
shank is secured against the bottom panel (760H760H
Align the mounting screws on the ECW-281B/B2-D525 bottom panel with the
Step 7:
mounting holes on the bracket.
Carefully insert the screws through the holes and gently pull the monitor
Step 8:
downwards until the ECW-281B/B2-D525 rests securely in the slotted holes
( F igure 4-13). Ensure that all four of the mounting screws fit snuggly into their
7 6 4
respective slotted holes.
F igure 4-12).
6 4
F igure 4-13).
4
Page 43