Ide Configuration; Bios Menu 5: Ide Configuration; Hyper Threading [Enabled]; Ata/Ide Configurations [Enhanced] - IEI Technology ECW-281B-D525 User Manual

ECW-281B/B2-D525 Embedded System


Hyper Threading [Enabled]

Use the Hyper Threading function to enable or disable the CPU hyper threading function.

Disabled

Enabled

5.3.3 IDE Configuration

Use the IDE Configuration menu (
of the IDE devices installed in the system.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
SATA Configuration
SATA Port0
SATA Port1
SATA Port2
SATA Port3
ATA/IDE Configuration
Configure SATA as
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.

BIOS Menu 5: IDE Configuration



ATA/IDE Configurations [Enhanced]

Use the ATA/IDE Configurations option to configure the ATA/IDE controller.

Disabled

Compatible
Disables the use of hyper threading technology
Enables the use of hyper threading technology
D
EFAULT
B IOS Menu 5) to change and/or set the configuration
5
Not Present
Not Present
Not Present
Not Present
[Enhanced]
[IDE]
Disables the on-board ATA/IDE controller.
Configures the on-board ATA/IDE controller to be in
compatible mode. In this mode, a SATA channel will
replace one of the IDE channels. This mode supports up
to 4 storage devices.
Select ATA/IDE
Configuration.
---------------------
: Select Screen
 : Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Page 57