1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Industrial PC
  5. TANK-870-Q170 Series
  6. User manual

IEI Technology TANK-870-Q170 Series User Manual

Embedded system with 6th/7th generation intel core processor, 4gb ddr4 pre-installed memory, vga/hdmi+dp/idp, two gigabit ethernet, rs-232/422/485, rohs compliant
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TANK-870-Q170 Embedded System
MODEL:
TANK-870-Q170 Series
Embedded System with 6th/7th Generation Intel® Core™ Processor,
4GB DDR4 Pre-installed Memory, VGA/HDMI+DP/iDP,
Two Gigabit Ethernet, RS-232/422/485,
RoHS Compliant
User Manual
Page I
Rev. 1.03 – August 18, 2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TANK-870-Q170 Series and is the answer not in the manual?

Questions and answers

Related Manuals for IEI Technology TANK-870-Q170 Series

Summary of Contents for IEI Technology TANK-870-Q170 Series

  • Page 1 TANK-870-Q170 Embedded System MODEL: TANK-870-Q170 Series Embedded System with 6th/7th Generation Intel® Core™ Processor, 4GB DDR4 Pre-installed Memory, VGA/HDMI+DP/iDP, Two Gigabit Ethernet, RS-232/422/485, RoHS Compliant User Manual Page I Rev. 1.03 – August 18, 2020...
  • Page 2 TANK-870-Q170 Embedded System Revision Date Version Changes August 18, 2020 1.03 Updated system photos Updated Section 1.6 Rear Panel Updated Section 2.3: Unpacking Checklist Updated Chapter 5 BIOS February 26, 2018 1.02 Updated Section 1.4: Technical Specifications Updated Section 2.3: Unpacking Checklist March 6, 2017 1.01 Add iDP module installation in Section 4.2.5: DisplayPort...
  • Page 3 TANK-870-Q170 Embedded System Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
  • Page 4 TANK-870-Q170 Embedded System Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product. NOTE These messages inform the reader of essential but non-critical information.

  • Page 5: Table Of Contents

    TANK-870-Q170 Embedded System Table of Contents 1 INTRODUCTION ......................1 1.1 O ........................2 VERVIEW 1.2 M ....................3 ODEL ARIATIONS 1.3 F ........................3 EATURES 1.4 T ..................4 ECHNICAL PECIFICATIONS 1.5 F ......................7 RONT ANEL 1.5.1 TANK-870-Q170-2 slot Front Panel ..............7 1.5.2 TANK-870-Q170-4 slot Front Panel ..............
  • Page 6 TANK-870-Q170 Embedded System 3.5.5 HDMI+DP Connector ..................36 3.5.6 LAN Connectors ....................36 3.5.7 Power Input, 3-pin Terminal Block ..............38 3.5.8 Power Input, 4-pin DIN Connector ..............38 3.5.9 RJ-45 RS-232 Serial Ports ................38 3.5.10 DB-9 RS-232/422/485 Serial Port Connectors ..........40 3.5.11 USB Connectors .....................
  • Page 7 TANK-870-Q170 Embedded System 4.4.4 Ethernet and USB 2.0 Connector (LAN2_USB2) ..........58 4.4.5 HDMI+DP Connector (DP_HDMI1) .............. 59 4.4.6 Power Connector (PWR1) ................59 4.4.7 Power Connector (PWR2) ................59 4.4.8 RS-232 Serial Port Connector (COM1_2) ............60 4.4.9 RS-232 Serial Port Connector (COM3_4) ............60 4.4.10 RS-232/422/485 Serial Port Connector (COM5_6) ........
  • Page 8 TANK-870-Q170 Embedded System 5.3.13 iWDD H/W Monitor ..................90 5.3.13.1 Smart Fan Mode Configuration .............. 91 5.4 C ........................92 HIPSET 5.4.1 System Agent (SA) Configuration ..............93 5.4.1.1 Memory Configuration ................94 5.4.1.2 Graphics Configuration ................95 5.4.1.3 PEG Port Configuration ................97 5.4.2 PCH-IO Configuration ..................
  • Page 9 TANK-870-Q170 Embedded System F.1 PEI B ....................131 ODES F.2 DXE B ....................131 ODES G HAZARDOUS MATERIALS DISCLOSURE ............132 G.1 R HS II D (2015/863/EU) ..............133 IRECTIVE G.2 C HS ......................134 HINA Page IX...
  • Page 10 Figure 1-10: TANK-870-Q170-2 slot Physical Dimensions (millimeters) ......... 19 Figure 1-11: TANK-870-Q170-4 slot Physical Dimensions (millimeters) ......... 20 Figure 3-1: Unscrew the Cover ....................29 Figure 3-2: Remove the Cover from TANK-870-Q170 Series ........... 29 Figure 3-3: HDD Installation ......................30 Figure 3-4: HDD Retention Screws ..................... 30 Figure 3-5: System Fan Installation ....................
  • Page 11 TANK-870-Q170 Embedded System Figure 3-20: VGA Connector ....................... 42 Figure 3-21: VGA Connector ....................... 42 Figure 3-22: Internal DisplayPort Connector Location ............. 43 Figure 3-23: iDP Module with Bracket ..................44 Figure 3-24: iDP Module Installation ................... 44 Figure 3-25: Remove Expansion Slot Bracket ................45 Figure 3-26: Secure iDP Module to System ................
  • Page 12 TANK-870-Q170 Embedded System List of Tables Table 1-1: TANK-870-Q170 Series Model Variations ..............3 Table 1-2: Technical Specifications ....................6 Table 1-3: LED Indicators Description..................11 Table 1-4: Supported Signals ...................... 17 Table 1-5: Rated Voltage and Current ..................18 Table 3-1: RJ-45 Ethernet Connector LEDs ................
  • Page 13 TANK-870-Q170 Embedded System Table 4-22: Power Connector Pinouts (PWR2) ................59 Table 4-23: Power Connector Pinouts (PWR1) ................59 Table 4-24: RS-232 Serial Port Connector Pinouts (COM1_2) ..........60 Table 4-25: RS-232 Serial Port Connector Pinouts (COM3_4) ..........60 Table 4-26: RS-232/422/485 Serial Port Connector Pinouts (COM5_6) ........60 Table 4-27: USB 3.0 (5Gb/s) Port Pinouts (USB3_CN1) ............
  • Page 14 TANK-870-Q170 Embedded System BIOS Menus BIOS Menu 1: Main ........................66 BIOS Menu 2: Advanced ......................67 BIOS Menu 3: CPU Configuration ....................68 BIOS Menu 4: PCH-FW Configuration ..................70 BIOS Menu 5: PTT Configuration ....................71 BIOS Menu 6: Trusted Computing ....................72 BIOS Menu 7: ACPI Configuration ....................
  • Page 15 TANK-870-Q170 Embedded System BIOS Menu 31: Server Mgmt .....................105 BIOS Menu 32: System Event Log ....................106 BIOS Menu 33: BMC Network Configuration ................107 Page XV...

  • Page 17: Introduction

    TANK-870-Q170 Embedded System Chapter Introduction Page 1...

  • Page 18: Overview

    Intel® Q170 chipset and supports two 260-pin DDR4 SDRAM SO-DIMM modules up to 64 GB (4 GB memory preinstalled). The TANK-870-Q170 Series includes one VGA port, one HDMI+DP port, one iDP port (optional) , two GbE LAN ports, four USB 3.0 (5Gb/s) ports, four USB 2.0 ports, four RS-232 connectors and two RS-232/422/485 connectors.

  • Page 19: Model Variations

    TANK-870-Q170 Embedded System 1.2 Model Variations The model variations of the TANK-870-Q170 Series are listed below. Model No. Expansion Slots TANK-870-Q170i-i5/4G/2A-R10 2 x PCIe by 8 expansion, Intel® Core™ i5-6500TE 2.3GHz TANK-870-Q170i-i5/4G/2B-R10 1 x PCIe by 16 & 1 x PCI expansion (up to 3.3 GHz, Quad Core, TDP...

  • Page 20: Technical Specifications

    TANK-870-Q170 Embedded System 1.4 Technical Specifications The TANK-870-Q170 Series technical specifications are listed in Table 1-2. Specifications Chassis Black C + Silver Color 2-slot: 121.5 x 255.2 x 205 Dimensions (WxHxD) (mm) 4-slot: 154.8 x 255.2 x 205 Fanless System Fan...
  • Page 21 TANK-870-Q170 Embedded System Specifications 4 x RS-232 (2 x RJ-45, 2 x DB-9 w/ isolation) COM Port 2 x RS-232/422/485 (DB-9) Digital I/O 8-bit digital I/O, 4-bit input/4-bit output 1 x VGA Display 1 x HDMI+DP 1 x iDP (optional) VGA: Up to 1920 x 1200@60Hz Resolution HDMI/DP: Up to 4096×2304@60Hz...

  • Page 22: Table 1-2: Technical Specifications

    TANK-870-Q170 Embedded System Specifications i7-6700TE -20°C ~ 45°C with air flow (SSD), 10% ~ 95%, non-condensing Operating Temperature i5-6500TE -20°C ~ 60°C with air flow (SSD), 10% ~ 95%, non-condensing -40°C ~ 85°C with air flow (SSD), Storage Temperature 10% ~ 90%, non-condensing Operating Shock Half-sine wave shock 5G;...

  • Page 23: Front Panel

    TANK-870-Q170 Embedded System 1.5 Front Panel 1.5.1 TANK-870-Q170-2 slot Front Panel The front panel of the TANK-870-Q170 Series has the following features (Figure 1-2): Figure 1-2: TANK-870-Q170 Series Front Panel Connectors and buttons on the front panel include the following: ...
  • Page 24 TANK-870-Q170 Embedded System  2 x RS-232/422/485 serial ports (DB-9)  2 x Gigabit Ethernet ports (RJ-45)  4 x USB 3.0 (5Gb/s) ports  4 x USB 2.0 ports  1 x Reset button  6 x LED indicators (Section 1.7) ...

  • Page 25: Tank-870-Q170-4 Slot Front Panel

    TANK-870-Q170 Embedded System 1.5.2 TANK-870-Q170-4 slot Front Panel The front panel of the TANK-870-Q170 Series has the following features (Figure 1-3): Figure 1-3: TANK-870-Q170 Series Front Panel Connectors and buttons on the front panel include the following:  1 x 4-pin power DC jack for 9 V ~ 36 V power input ...

  • Page 26: Rear Panel

    4 x Expansion slots  1 x ACC mode switch  1 x AT/ATX mode switch 1.6 Rear Panel The rear panel of the TANK-870-Q170 Series has the following features (Figure 1-4): Figure 1-4: TANK-870-Q170 Series Rear Panel Page 10...

  • Page 27: Led Indicators

    TANK-870-Q170 Embedded System 1.7 LED Indicators There are several indicators on the rear panel of the TANK-870-Q170 Series as shown in Figure 1-5. Figure 1-5: TANK-870-Q170 Series LED Indicators The descriptions of each LED indicator are listed below. LED Indicator Description The current power mode status is AT mode.

  • Page 28: Backplane Options

    TANK-870-Q170 Embedded System 1.8 Backplane Options The backplane options of the TANK-870-Q170 Series are shown below. Figure 1-6: HPE-2S86 (for 2A model) PWR1: Description +12 V +12 V Figure 1-7: HPE-4AS87 (for 4A model) Page 12...
  • Page 29 TANK-870-Q170 Embedded System PWR1: Description +12 V +12 V MINI-PCIE1: Description Description PCIE_WAKE# VCC3 1.5 V WLAN_CLKREQ# CLK- CLK+ Page 13...

  • Page 30: Figure 1-8: Hpe-2S87 (For 2B Model)

    TANK-870-Q170 Embedded System Description Description PCIRST# VCC3 PCIRST# PCIE-RXN VCC3 PCIE-RXP 1.5 V SMBCLK PCIE-TXN SMBDATA PCIE-TXP USBD- USBD+ VCC3 VCC3 RF_LINK# BLUELED# 1.5 V VCC3 Figure 1-8: HPE-2S87 (for 2B model) Page 14...

  • Page 31: Figure 1-9: Hpe-4S87 (For 4B Model)

    TANK-870-Q170 Embedded System PWR1: Description +12 V +12 V Figure 1-9: HPE-4S87 (for 4B model) PWR1: Page 15...
  • Page 32 TANK-870-Q170 Embedded System Description +12 V +12 V MINI-PCIE1: Description Description PCIE_WAKE# VCC3 1.5 V WLAN_CLKREQ# CLK- CLK+ PCIRST# VCC3 PCIRST# PCIE-RXN VCC3 PCIE-RXP Page 16...

  • Page 33: Table 1-4: Supported Signals

    TANK-870-Q170 Embedded System Description Description 1.5 V SMBCLK PCIE-TXN SMBDATA PCIE-TXP USBD- USBD+ VCC3 VCC3 RF_LINK# BLUELED# 1.5 V VCC3 The supported signals of the backplane slots are listed below. Backplane Slot Signal PCIe x16 PCIe x8 HPE-2S86 (for 2A model) PCIe x16 PCIe x8 PCIe x16...

  • Page 34: Table 1-5: Rated Voltage And Current

    TANK-870-Q170 Embedded System Rated Voltage Rated Current +5 V 4.0 A +12 V 2.5 A -12 V 0.1 A +3.3 V 5.0 A Table 1-5: Rated Voltage and Current WARNING: The system default power is 120 W. The maximum total power of the backplane to support expansion cards is 45 W.

  • Page 35: Physical Dimensions

    TANK-870-Q170 Embedded System 1.9 Physical Dimensions The following sections describe the physical dimensions for each model of the TANK-870-Q170 Series. 1.9.1 TANK-870-Q170-2 slot Physical Dimensions The physical dimensions of the TANK-870-Q170-2 slot are shown in Figure 1-10. Figure 1-10: TANK-870-Q170-2 slot Physical Dimensions (millimeters)

  • Page 36: Tank-870-Q170-4 Slot Physical Dimensions

    TANK-870-Q170 Embedded System 1.9.2 TANK-870-Q170-4 slot Physical Dimensions The physical dimensions of the TANK-870-Q170-4 slot are shown in Figure 1-11. Figure 1-11: TANK-870-Q170-4 slot Physical Dimensions (millimeters) Page 20...

  • Page 37: Unpacking

    TANK-870-Q170 Embedded System Chapter Unpacking Page 21...

  • Page 38: Anti-Static Precautions

    Electrostatic discharge (ESD) can cause serious damage to electronic components, including the TANK-870-Q170 Series. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the TANK-870-Q170 Series or any other electrical component is handled, the following anti-static precautions are strictly adhered to.

  • Page 39: Unpacking Checklist

    If some of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the TANK-870-Q170 Series from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to sales@ieiworld.com.
  • Page 40 TANK-870-Q170 Embedded System Quantity Item and Part Number Image Standard HDMI Security Holder RJ-45 to D-sub 9-pin connector The following table lists the optional items that can be purchased separately. Optional European power cord (P/N: 32702-000400-200-RS) 120W Power adapter Adapter Power;FSP;FSP150-ABAN3;9NA1504811;Active PFC;Vin:90~264VAC;150W;Dim:75.6*151.3*25.4mm;Plug=6.5mm;...
  • Page 41 TANK-870-Q170 Embedded System Optional Fan- 63040-010120-300-RSFan Module;MODIFY 31100-000272-RS;+12V DC;4PIN;40*40*15mm ;STANDARD;;FD124015LB2W3;; L= 400mm MOLEX 5051-04P P=2.54;CCL;RoHS (P/N: EMB-FAN-KIT02-R10) IPMI 2.0 adapter card with AST2400 BMC chip for DDR3 SO-DIMM socket interface (P/N: iRIS-2400-R10) 1T1R wifi module kit for embedded system, IEEE802.11a/b/g/n/ac WiFi with Bluetooth 4.0/3.0+HS, 1 x wifi module, 2 x 250 mm RF cable, 2 x Antenna, RoHS (P/N: EMB-WIFI-KIT01-R20)
  • Page 42 20-pin Infineon TPM module, S/W management tool, firmware v3.17 (P/N: TPM-IN01-R20) OS Image with Windows® Embedded Standard 7 E 64-bit for TANK-870-Q170 Series, with DVD-ROM, RoHS (P/N: TANK-870-Q170-WES7E64-R10) OS Image with Windows Embedded Standard 10 E High End 64-bit for TANK-870-Q170-i7 Series, with...

  • Page 43: Installation

    TANK-870-Q170 Embedded System Chapter Installation Page 27...

  • Page 44: Installation Precautions

    Electric shock and personal injury might occur if the rear panel of the TANK-870-Q170 Series is opened while the power cord is still connected to an electrical outlet.

  • Page 45: Figure 3-1: Unscrew The Cover

    Unplug the SATA signal and power cables connected to the TANK-870-Q170 Series, and then put the cover on a flat surface (Figure 3-2). Figure 3-2: Remove the Cover from TANK-870-Q170 Series Step 3: Attach the HDD to the HDD bracket, and then slide the HDD to connect with the SATA connector (Figure 3-3).

  • Page 46: Figure 3-3: Hdd Installation

    Step 4: Secure the HDD with the HDD bracket by four retention screws (Figure 3-4). Figure 3-4: HDD Retention Screws Step 5: Reconnect the SATA signal and power cables to the TANK-870-Q170 Series. Step 6: Reinstall the cover. Page 30...

  • Page 47: System Fan Installation

    Unplug the SATA signal and power cables connected to the TANK-870-Q170 Series, and then place the cover on a flat surface (Figure 3-2). Step 3: Attach the system fan to the TANK-870-Q170 Series and secure it by four retention screws (Figure 3-5). Figure 3-5: System Fan Installation...

  • Page 48: Mounting The System With Mounting Brackets

    TANK-870-Q170 Embedded System 3.4 Mounting the System with Mounting Brackets To mount the embedded system onto a wall or some other surface using the two mounting brackets, please follow the steps below. Step 1: Turn the embedded system to the left side panel. Step 2: Align the two retention screw holes in each bracket with the corresponding retention screw holes on the bottom surface or the left side panel (Figure 3-6).

  • Page 49: External Peripheral Interface Connectors

    TANK-870-Q170 Embedded System 3.5 External Peripheral Interface Connectors The TANK-870-Q170 Series has the following connectors. Detailed descriptions of the connectors can be found in the subsections below.  ACC mode switch  AT/ATX power mode switch  Audio  Digital I/O ...

  • Page 50: Acc Mode Selection

    TANK-870-Q170 Embedded System 3.5.1 ACC Mode Selection The ACC mode is designed for vehicle applications. The TANK-870-Q170 Series allows turning the ACC mode on or off. The setting can be made through the ACC mode switch on the external peripheral interface panel as shown below.

  • Page 51: At/Atx Power Mode Selection

    TANK-870-Q170 Embedded System 3.5.2 AT/ATX Power Mode Selection The TANK-870-Q170 Series supports AT and ATX power modes. The setting can be made through the AT/ATX power mode switch on the external peripheral interface panel as shown below. Figure 3-8: AT/ATX Power Mode Switch 3.5.3 Audio Connector...

  • Page 52: Digital Input/Output Connector

    Locate the RJ-45 connectors. The locations of the RJ-45 connectors are shown in Figure 1-2. Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of the RJ-45 connectors on the TANK-870-Q170 Series. See Figure 3-12. Page 36...

  • Page 53: Figure 3-12: Lan Connection

    TANK-870-Q170 Embedded System Figure 3-12: LAN Connection Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN cable RJ-45 connector into the on-board RJ-45 connector. Figure 3-13: RJ-45 Ethernet Connector The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The green LED indicates activity on the port and the yellow LED indicates the port is linked.

  • Page 54: Power Input, 3-Pin Terminal Block

    TANK-870-Q170 Embedded System 3.5.7 Power Input, 3-pin Terminal Block The power connector connects the leads of a 9 V~36 V DC power supply into the terminal block. Make sure that the power and ground wires are attached to the correct sockets of the connector.

  • Page 55: Figure 3-16: Rj-45 Rs-232 Serial Device Connection

    TANK-870-Q170 Embedded System Figure 3-16: RJ-45 RS-232 Serial Device Connection Step 3: Insert the serial connector. Insert the DB-9 connector of a serial device into the DB-9 connector on the RJ-45 to DB-9 COM port cable. Step 4: Secure the connector. Secure the serial device connector to the external interface by tightening the two retention screws on either side of the connector.

  • Page 56: Rs-232/422/485 Serial Port Connectors

    TANK-870-Q170 Embedded System 3.5.10 DB-9 RS-232/422/485 Serial Port Connectors DB-9 RS-232/422/485 serial port devices can be attached to the DB-9 ports on the rear panel. Step 1: Locate the DB-9 connector. The locations of the DB-9 connectors are shown in Figure 1-2. Step 2: Insert the serial connector.

  • Page 57: Usb Connectors

    TANK-870-Q170 Embedded System 3.5.11 USB Connectors The USB ports are for connecting USB peripheral devices to the system. Step 1: Locate the USB connectors. The locations of the USB connectors are shown in Figure 1-2. Step 2: Align the connectors. Align the USB device connector with one of the connectors.

  • Page 58: Figure 3-20: Vga Connector

    Once the connectors are properly aligned with, insert the male connector from the VGA screen into the female connector on the TANK-870-Q170 Series. See Figure 3-20. Figure 3-20: VGA Connector Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA monitor to the external interface by tightening the two retention screws on either side of the connector.

  • Page 59: Internal Peripheral Interface Connectors

    Through the IEI iDP converter cards, the iDP connector can support different display specifications, such as VGA, HDMI, DVI-D, LVDS and DisplayPort. To connect an iDP module to TANK-870-Q170 Series please follow the instructions below. Step 1: Loosen the two thumbscrews on the front panel, slide the cover outward, and then lift the cover up gently (Figure 3-1).

  • Page 60: Figure 3-23: Idp Module With Bracket

    TANK-870-Q170 Embedded System Figure 3-23: iDP Module with Bracket Step 4: Connect the iDP module to the DisplayPort connector on the motherboard. See Figure 3-24. Figure 3-24: iDP Module Installation Step 5: Remove the retention screws on the expansion slot bracket. See Figure 3-25. Page 44...

  • Page 61: Figure 3-25: Remove Expansion Slot Bracket

    TANK-870-Q170 Embedded System Figure 3-25: Remove Expansion Slot Bracket Step 6: Secure the iDP module with bracket to the system. See Figure 3-26. Figure 3-26: Secure iDP Module to System Step 7: Reinstall the cover. Page 45...

  • Page 62: Table 3-3: Idp Converter Cards

    TANK-870-Q170 Embedded System WARNING: Installing the iDP module will occupy one expansion slot. The following table lists the iDP converter cards that can be installed to the system. DisplayPort to HDMI converter board (for IEI iDP connector) (P/N: DP-HDMI-R10) DisplayPort to LVDS converter board (for IEI iDP connector) (P/N: DP-LVDS-R10) DisplayPort to VGA converter board (for IEI iDP...

  • Page 63: Powering On/Off The System

    TANK-870-Q170 Embedded System 3.7 Powering On/Off the System WARNING: Make sure a power supply with the correct input voltage is being fed into the system. Incorrect voltages applied to the system may cause damage to the internal electronic components and may also cause injury to the user. ...

  • Page 64: Acc On Mode

    3.8.1 ACC ON Mode The TANK-870-Q170 Series supports single power input and also can be simultaneously connected to two power sources. When both power connectors are connected to power sources with 9 V~36 V power input, the one with higher voltage will supply power to the system.

  • Page 65: Acc Off Mode

    10s. 3.8.2 ACC OFF Mode The TANK-870-Q170 Series supports single power input and also can be simultaneously connected to two power sources. When both power connectors are connected to power sources with 9 V~36 V power input, the one with higher voltage will supply power to the system.

  • Page 66: System Motherboard

    TANK-870-Q170 Embedded System Chapter System Motherboard Page 50...

  • Page 67: Overview

    TANK-870-Q170 Embedded System 4.1 Overview This chapter details all the jumpers and connectors of the system motherboard. 4.2 Board Layout The figures below show all the connectors and jumpers of the system motherboard. The Pin 1 locations of the on-board connectors are also indicated in the diagram below. Figure 4-1: System Motherboard (Front) Figure 4-2: System Motherboard (Rear) Page 51...

  • Page 68: Internal Peripheral Connectors

    TANK-870-Q170 Embedded System 4.3 Internal Peripheral Connectors The table below shows a list of the internal peripheral interface connectors on the system motherboard. Pinouts of these connectors can be found in the following sections. Connector Type Label Backplane power connector 4-pin wafer Battery connector 2-pin wafer...

  • Page 69: Battery Connector (Bat1)

    TANK-870-Q170 Embedded System 4.3.2 Battery Connector (BAT1) PIN NO. DESCRIPTION VBATT Table 4-3: Battery Connector Pinouts (BAT1) 4.3.3 BIOS Programming Connector (JSPI1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION +V3.3M_SPI_CON SPI_CS SPI_SO_SW SPI_CLK_SW SPI_SI_SW Table 4-4: BIOS Programming Connector Pinouts (JSPI1) 4.3.4 CPU Fan Connector (CPU_FAN1) PIN NO.

  • Page 70: Ec Debug Connector (Cn4)

    TANK-870-Q170 Embedded System DPD_OB_LANE1_N_C VCC3 Table 4-6: DisplayPort connector Pinouts (DP1) 4.3.6 EC Debug Connector (CN4) PIN NO. DESCRIPTION PIN NO. DESCRIPTION KSI0 KSO9 KSO0 KSO10 KSO1 KSO12 KSO2 KSI1 KSO3 KSO11 KSO4 KSI2 KSO5 KSI3 KSO6 KSO7 KSO8 Table 4-7: EC Debug Connector Pinouts (CN4) 4.3.7 EC Programming Connector (JSPI2) PIN NO.

  • Page 71: Led Connector (J2)

    TANK-870-Q170 Embedded System 4.3.9 LED Connector (J2) PIN NO. DESCRIPTION PIN NO. DESCRIPTION +V3.3S_IO +V3.3A_EC_IO IRST_PD# IATX_LED# IPWRLED01# IPWRLED02# IIPMI_LED# ICPU_LED# IDISKLED# Table 4-10: LED Connector Pinouts (J2) 4.3.10 SATA Power Connectors (CN2, CN3) PIN NO. DESCRIPTION +V5S Table 4-11: SATA Power Connectors Pinouts (CN2, CN3) 4.3.11 TPM Connector (TPM1) PIN NO.

  • Page 72: Usb 3.0 (5Gb/S) Connector (Usb3-1)

    TANK-870-Q170 Embedded System 4.3.12 USB 3.0 (5Gb/s) Connector (USB3-1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION VCC_USB3_56 USB3_RX5_N_C USB3_RX5_P_C USB3P1_TXDN5_C USB3P1_TXDP5_C USB2P5_DM1_L USB2P5_DP1_L USB2P6_DP2_L USB2P6_DM2_L USB3P1_TXDP6_C USB3P1_TXDN6_C USB3_RX6_P_C USB3_RX6_N_C VCC_USB3_56 Table 4-13: USB 3.0 (5Gb/s) Connector Pinouts (USB3-1) 4.4 External Interface Panel Connectors The table below shows a list of the external interface panel connectors on the system motherboard.

  • Page 73: Audio Jack (Jaudio1)

    TANK-870-Q170 Embedded System 4.4.1 Audio Jack (JAUDIO1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION ILMIC1-CONN-L IJD_MIC ILMIC1-CONN-R ILFRONT-L IJD_FRONT ILFRONT-R Table 4-15: Audio Jack Pinouts (JAUDIO1) 4.4.2 DIO Connector (DIO1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION DIN0 DOUT0 DIN1 DOUT1 DIN2 DOUT2 DIN3 DOUT3...

  • Page 74: Ethernet And Usb 2.0 Connector (Lan2_Usb2)

    TANK-870-Q170 Embedded System PIN NO. DESCRIPTION PIN NO. DESCRIPTION VCC_USB7 -DATA7 +DATA7 VCC_USB7 -DATA8 +DATA8 Table 4-18: USB 2.0 Connector Pinouts (LAN1_USB1B) 4.4.4 Ethernet and USB 2.0 Connector (LAN2_USB2) DESCRIPTION DESCRIPTION ITRD2P0 ITRD2N0 ITRD2P1 ITRD2N1 ITRD2P2 ITRD2N2 ITRD2P3 ITRD2N3 ILANEXT_1000- ILANEXT_100- ILANEXT_LINK_ACT- ILANEXT_LINK_PWR...

  • Page 75: Hdmi+Dp Connector (Dp_Hdmi1)

    TANK-870-Q170 Embedded System 4.4.5 HDMI+DP Connector (DP_HDMI1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION DUALDISPLAY_0P DUALDISPLAY_0N DUALDISPLAY_1P DUALDISPLAY_1N DUALDISPLAY_2P DUALDISPLAY_2N DUALDISPLAY_3P DUALDISPLAY_3N DP_CONFIG1 DP_CONFIG2 DP_AUXP DDC_SDA DP_AUXN DP_HPD DP_PWRTN DP_VCC Table 4-21: HDMI+DP Connector Pinouts (DP_HDMI1) 4.4.6 Power Connector (PWR1) PIN NO. DESCRIPTION PIN NO.

  • Page 76: Serial Port Connector (Com1_2)

    TANK-870-Q170 Embedded System 4.4.8 RS-232 Serial Port Connector (COM1_2) PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1(10) 6(15) 2(11) 7(16) 3(12) 8(17) 4(13) 9(18) 5(14) Table 4-24: RS-232 Serial Port Connector Pinouts (COM1_2) 4.4.9 RS-232 Serial Port Connector (COM3_4) PIN NO. DESCRIPTION PIN NO.

  • Page 77: Usb 3.0 (5Gb/S) Connector (Usb3_Cn1)

    TANK-870-Q170 Embedded System 4.4.11 USB 3.0 (5Gb/s) Connector (USB3_CN1) DESCRIPTION DESCRIPTION USBV0L USBV0L DATA0_N DATA1_N DATA0_P DATA1_P IUSB3_RX1_N IUSB3_RX2_N IUSB3_RX1_P IUSB3_RX2_P IUSB3_TX1_N IUSB3_TX2_N IUSB3_TX1_P IUSB3_TX2_P Table 4-27: USB 3.0 (5Gb/s) Port Pinouts (USB3_CN1) 4.4.12 USB 3.0 (5Gb/s) Connector (USB3_CN2) DESCRIPTION DESCRIPTION USBV2L USBV2L...

  • Page 78: Vga Connector (Vga1)

    TANK-870-Q170 Embedded System 4.4.13 VGA Connector (VGA1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION Green Blue VGAVCC HOTPLUG DDCDAT HSYNC VSYNC DDCCLK Table 4-29: VGA Connector Pinouts (VGA1) Page 62...

  • Page 79: Bios

    TANK-870-Q170 Embedded System Chapter BIOS Page 63...

  • Page 80: Introduction

    TANK-870-Q170 Embedded System 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. NOTE: Some of the BIOS options may vary throughout the life cycle of the product and are subject to change without prior notice.

  • Page 81: Getting Help

    TANK-870-Q170 Embedded System Function Page Up key Increase the numeric value or make changes Page Dn key Decrease the numeric value or make changes Esc key Main Menu – Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu -- Exit current page and return to Main Menu General help, only for Status Page Setup Menu and Option Page Setup Menu...

  • Page 82: Main

    TANK-870-Q170 Embedded System 5.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Main Advanced Chipset...

  • Page 83: Advanced

    TANK-870-Q170 Embedded System 5.3 Advanced Use the Advanced menu (BIOS Menu 2) to configure the CPU and peripheral devices through the following sub-menus: WARNING! Setting the wrong values in the sections below may cause the system to malfunction. Make sure that the settings made are compatible with the hardware.

  • Page 84: Cpu Configuration

    TANK-870-Q170 Embedded System 5.3.1 CPU Configuration Use the CPU Configuration menu (BIOS Menu 3) to enter the CPU Information submenu or enable Intel Virtualization Technology. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced CPU Configuration When enabled, a VMM can utilize the additional Type Intel(R) Core(TM)
  • Page 85 TANK-870-Q170 Embedded System  Active Processor Cores [All] Use the Active Processor Cores option to configure the number of the active processor cores.  Active all of the processor cores EFAULT  Active one of the processor cores  Active two of the processor cores ...

  • Page 86: Pch-Fw Configuration

    TANK-870-Q170 Embedded System 5.3.2 PCH-FW Configuration The PCH-FW Configuration menu (BIOS Menu 4) allows Intel® Active Management Technology (AMT) options to be configured. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced ME Firmware Version 11.8.71.3630 Configure PTT ME Firmware Mode Normal Mode ME Firmware SKU...

  • Page 87: Ptt Configuration

    TANK-870-Q170 Embedded System 5.3.2.1 PTT Configuration Use the PTT Configuration menu (BIOS Menu 5) to configure settings related to the Trusted Platform Module (TPM). Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced PTT Capability / State 1 / 0 Select TPM device: PTT or dTPM.

  • Page 88: Trusted Computing

    TANK-870-Q170 Embedded System 5.3.3 Trusted Computing Use the Trusted Computing menu (BIOS Menu 6) to configure settings related to the Trusted Computing Group (TCG) Trusted Platform Module (TPM). Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced Configuration Enables or Disables BIOS Security Device Support [Disable]...

  • Page 89: Acpi Settings

    TANK-870-Q170 Embedded System 5.3.4 ACPI Settings The ACPI Settings menu (BIOS Menu 7) configures the Advanced Configuration and Power Interface (ACPI) options. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced ACPI Settings ACPI Sleep State [S3 (Suspend to RAM)] ---------------------- : Select Screen ↑...

  • Page 90: Sata Configuration

    TANK-870-Q170 Embedded System 5.3.5 SATA Configuration Use the SATA Configuration menu (BIOS Menu 8) to change and/or set the configuration of the SATA devices installed in the system. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced SATA Configuration Enable/Disable SATA Device.

  • Page 91: Amt Configuration

    TANK-870-Q170 Embedded System  Hot Plug [Disabled] Use the Hot Plug option to enable or disable the hot plug function.  Disables the hot plug function. Disabled EFAULT  Enables the hot plug function. Enabled 5.3.6 AMT Configuration The AMT Configuration menu (BIOS Menu 9) allows the advanced power management options to be configured.

  • Page 92: F81866 Super Io Configuration

    TANK-870-Q170 Embedded System  Unconfigure ME [Disabled] Use the Unconfigure ME option to perform ME unconfigure without password operation.  Not perform ME unconfigure Disabled EFAULT  To perform ME unconfigure Enabled 5.3.7 F81866 Super IO Configuration Use the F81866 Super IO Configuration menu (BIOS Menu 10) to set or change the configurations for the serial ports.

  • Page 93: Serial Port N Configuration

    TANK-870-Q170 Embedded System 5.3.7.1 Serial Port n Configuration Use the Serial Port n Configuration menu (BIOS Menu 11) to configure the serial port n. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced Serial Port n Configuration Enable or Disable Serial Port (COM) Serial Port [Enabled]...
  • Page 94 TANK-870-Q170 Embedded System  IO=3F8h; IRQ=3, Serial Port I/O port address is 3F8h and the 4, 7, 9, 10, 11 interrupt address is IRQ3, 4, 7, 9, 10, 11  Serial Port I/O port address is 2F8h and the IO=2F8h; IRQ=3, interrupt address is IRQ3, 4, 7, 9, 10, 11 4, 7, 9, 10, 11 ...
  • Page 95 TANK-870-Q170 Embedded System  IO=2E8h; IRQ=3, Serial Port I/O port address is 2E8h and the 4, 7, 9, 10, 11 interrupt address is IRQ3, 4, 7, 9, 10, 11 5.3.7.1.3 Serial Port 3 Configuration  Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port. ...
  • Page 96 TANK-870-Q170 Embedded System 5.3.7.1.4 Serial Port 4 Configuration  Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.  Disabled Disable the serial port  Enable the serial port Enabled EFAULT  Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address.
  • Page 97 TANK-870-Q170 Embedded System  Enabled Enable the serial port EFAULT  Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address.  The serial port IO port address and interrupt Auto EFAULT address are automatically detected.
  • Page 98 TANK-870-Q170 Embedded System 5.3.7.1.6 Serial Port 6 Configuration  Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.  Disabled Disable the serial port  Enable the serial port Enabled EFAULT  Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address.

  • Page 99: Rtc Wake Settings

    TANK-870-Q170 Embedded System 5.3.8 RTC Wake Settings The RTC Wake Settings menu (BIOS Menu 12) configures RTC wake event. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced Wake system with Fixed Time [Disabled] Enable or disable System wake on alarm event.

  • Page 100: Serial Port Console Redirection

    TANK-870-Q170 Embedded System 5.3.9 Serial Port Console Redirection The Serial Port Console Redirection menu (BIOS Menu 13) allows the console redirection options to be configured. Console redirection allows users to maintain a system remotely by re-directing keyboard input and text output through the serial port. Aptio Setup Utility –...

  • Page 101: Console Redirection Settings

    TANK-870-Q170 Embedded System  Enabled Enabled the console redirection function 5.3.9.1 Console Redirection Settings The Console Redirection Settings menu (BIOS Menu 14) allows the console redirection options to be configured. The option is active when Console Redirection option is enabled. Aptio Setup Utility –...
  • Page 102 TANK-870-Q170 Embedded System  Bits per second [115200] Use the Bits per second option to specify the transmission speed of the serial port.  The transmission speed is 9600 9600  The transmission speed is 19200 19200  38400 The transmission speed is 38400 ...

  • Page 103: Intel Txt Information

    TANK-870-Q170 Embedded System  Stop Bits [1] Use the Stop Bits option to specify the number of stop bits used to indicate the end of a serial data packet. Communication with slow devices may require more than 1 stop bit. ...

  • Page 104: Usb Configuration

    TANK-870-Q170 Embedded System 5.3.11 USB Configuration Use the USB Configuration menu (BIOS Menu 16) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced USB Configuration Enables Legacy USB support.

  • Page 105: Iei Feature

    TANK-870-Q170 Embedded System  Disabled Legacy USB support disabled  Legacy USB support disabled if no USB devices are Auto connected 5.3.12 iEi Feature Use the iEi Feature menu (BIOS Menu 17) to configure the iEi features. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced iEi Feature Auto Recovery Function...

  • Page 106: Iwdd H/W Monitor

    TANK-870-Q170 Embedded System 5.3.13 iWDD H/W Monitor The iWDD H/W Monitor menu (BIOS Menu 18) shows the operating temperature, fan speeds and system voltages. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced PC Health Status Offset from factory set Tcc Activation CPU Temperature :+40 °C...

  • Page 107: Smart Fan Mode Configuration

    TANK-870-Q170 Embedded System CPU_Fan1 Speed  Voltages: +VCCCORE +V5S +V12S +VDDQ MBATTERY_IN1_EC SBATTERY_A_EC  Tcc Activation Offset [Enabled] Offset from default value of Thermal Control Circuit (TCC) activation temperature at which the TCC must be activated. TCC Activation Offset range is 0 to 63. 5.3.13.1 Smart Fan Mode Configuration Use the Smart Fan Mode Configuration submenu (BIOS Menu 19) to configure the smart fan temperature and speed settings.

  • Page 108: Chipset

    TANK-870-Q170 Embedded System  Smart Fan control [Auto Mode] Use the Smart Fan control BIOS option to configure the CPU Smart Fan.  The fan spins at the speed set in the manual Manual Mode setting  The fan adjusts its speed using these Auto Mode EFAULT settings:...

  • Page 109: System Agent (Sa) Configuration

    TANK-870-Q170 Embedded System Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Server Mgmt > System Agent (SA) Configuration PCH Parameters > PCH-IO Configuration --------------------- : Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.

  • Page 110: Memory Configuration

    TANK-870-Q170 Embedded System  VT-d [Disabled] Use the VT-d option to enable or disable VT-d support.  Disable VT-d support. Disabled EFAULT  Enable VT-d support. Enabled 5.4.1.1 Memory Configuration Use the Memory Configuration submenu (BIOS Menu 22) to view memory information. Aptio Setup Utility –...

  • Page 111: Graphics Configuration

    TANK-870-Q170 Embedded System 5.4.1.2 Graphics Configuration Use the Graphics Configuration (BIOS Menu 23) menu to configure the video device connected to the system. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Chipset Graphics Configuration Select which of IGFX/PEG/PCI Graphics Primary Display [Auto] device should be Primary...
  • Page 112 TANK-870-Q170 Embedded System  Enabled Default  DVMT Pre-Allocated [256M] Use the DVMT Pre-Allocated option to set the amount of system memory allocated to the integrated graphics processor when the system boots. The system memory allocated can then only be used as graphics memory, and is no longer available to applications or the operating system.

  • Page 113: Peg Port Configuration

    TANK-870-Q170 Embedded System 5.4.1.3 PEG Port Configuration Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Chipset PEG Port Configuration Configure PEG 0:1:0 Max Speed PEG 0 :1 :0 Not Present Max Link Speed [Auto] PEG 0 :1 :1 Not Present ---------------------- : Select Screen...

  • Page 114: Pch-Io Configuration

    TANK-870-Q170 Embedded System 5.4.2 PCH-IO Configuration Use the PCH-IO Configuration menu (BIOS Menu 25) to configure the PCH parameters. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Chipset PCH-IO Configuration Select the state system should be when restoring Auto Power Button Status [Disabled(ATX)] on AC Power Loss.

  • Page 115: Pci Express Configuration

    TANK-870-Q170 Embedded System  Enabled Power saving function is enabled. It will reduce power consumption when the system is off.  USB Power SW1 [+5V DUAL] Use the USB Power SW1 BIOS option to configure the USB power source for the corresponding USB connectors.

  • Page 116: Hd Audio Configuration

    TANK-870-Q170 Embedded System  PCI Express Root [Enabled] Use the PCI Express Root option to enable or disable the PCI Express (PEG) controller. The following options are available:  Disabled  Enabled Default  PCIe Speed Use PCIe Speed option to select the speed type of the PCIe Mini slot. The following options are available: ...

  • Page 117: Security

    TANK-870-Q170 Embedded System  HD Audio [Auto] Use the HD Audio BIOS option to enable or disable the High Definition Audio controller.  The High Definition Audio controller is disabled. Disabled  The High Definition Audio controller is enabled. Enabled ...

  • Page 118: Boot

    TANK-870-Q170 Embedded System 5.6 Boot Use the Boot menu (BIOS Menu 29) to configure system boot options. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Boot Boot Configuration Select the keyboard Bootup NumLock State [On] NumLock state Quiet Boot [Enabled] Launch PXE OpROM [Disabled]...
  • Page 119 TANK-870-Q170 Embedded System  Quiet Boot [Enabled] Use the Quiet Boot BIOS option to select the screen display when the system boots.  Normal POST messages displayed Disabled  OEM Logo displayed instead of POST messages Enabled EFAULT  Launch PXE OpROM [Disabled] Use the Launch PXE OpROM option to enable or disable boot option for legacy network devices.

  • Page 120: Save & Exit

    TANK-870-Q170 Embedded System 5.7 Save & Exit Use the Save & Exit menu (BIOS Menu 30) to load default BIOS values, optimal failsafe values and to save configuration changes. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Main Advanced Chipset Security...

  • Page 121: Server Mgmt

    TANK-870-Q170 Embedded System  Restore User Defaults Use the Restore User Defaults option to restore the user defaults to all the setup options. 5.8 Server Mgmt Use the Server Mgmt menu (BIOS Menu 31) to access the server management menus. Aptio Setup Utility –...

  • Page 122: System Event Log

    TANK-870-Q170 Embedded System 5.8.1 System Event Log Use the System Event Log menu (BIOS Menu 32) to configure the event log. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Server Mgmt Enabling/Disabling Options Change this to enable or SEL Components [Enabled] disable all features of...

  • Page 123: Bmc Network Configuration

    TANK-870-Q170 Embedded System  When SEL is Full [Do Nothing] Use When SEL is FULL option to select options for reactions to a full SEL. The following options are available:  Do Nothing Default  Erase Immediately 5.8.2 BMC network configuration Use the BMC network configuration menu (BIOS Menu 33) to configure BMC network parameters.

  • Page 124: A Regulatory Compliance

    TANK-870-Q170 Embedded System Appendix Regulatory Compliance Page 108...
  • Page 125 TANK-870-Q170 Embedded System DECLARATION OF CONFORMITY This equipment is in conformity with the following EU directives:  EMC Directive (2014/30/EU)  Low-Voltage Directive (2014/35/EU)  RoHS II Directive (2011/65/EU, 2015/863/EU) If the user modifies and/or install other devices in the equipment, the CE conformity declaration may no longer apply.
  • Page 126 TANK-870-Q170 Embedded System Eesti [Estonian] IEI Integration Corp deklareerib seadme seadme vastavust direktiivi 2014/53/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. Español [Spanish] IEI Integration Corp declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/EU. Ελληνική...
  • Page 127 TANK-870-Q170 Embedded System Magyar [Hungarian] IEI Integration Corp nyilatkozom, hogy a berendezés megfelel a vonatkozó alapvetõ követelményeknek és az 2014/53/EU irányelv egyéb elõírásainak. Polski [Polish] IEI Integration Corp oświadcza, że wyrobu jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 2014/53/EU. Português [Portuguese] IEI Integration Corp declara que este equipamento está...
  • Page 128 TANK-870-Q170 Embedded System FCC WARNING This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and   This device must accept any interference received, including interference that may cause undesired operation.

  • Page 129: Bbios Options

    TANK-870-Q170 Embedded System Appendix BIOS Options Page 113...
  • Page 130 TANK-870-Q170 Embedded System Below is a list of BIOS configuration options in the BIOS chapter. System Date [xx/xx/xx] ......................66 System Time [xx:xx:xx] ....................... 66 Intel (VMX) Virtualization Technology [Enabled] .............. 68 Active Processor Cores [All] ....................69 EIST [Enabled] ........................69 CPU C states [Disabled] ......................
  • Page 131 TANK-870-Q170 Embedded System Parity [None] ......................... 86 Stop Bits [1] .......................... 87 Intel TXT (LT) Support [Disabled] ..................87 USB Devices ......................... 88 Legacy USB Support [Enabled] ..................88 Auto Recovery Function [Disabled] ................... 89 PC Health Status ........................90 Tcc Activation Offset [Enabled] ..................
  • Page 132 TANK-870-Q170 Embedded System Restore Defaults ........................104 Save as User Defaults .......................104 Restore User Defaults .......................105 SEL Components [Enabled] ....................106 Erase SEL [No] ........................106 When SEL is Full [Do Nothing] ..................107 Configuration Address source [Unspecified] ..............107 Page 116...

  • Page 133: C Terminology

    TANK-870-Q170 Embedded System Appendix Terminology Page 117...
  • Page 134 TANK-870-Q170 Embedded System AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configuration and Power Interface (ACPI) is an OS-directed configuration, power management, and thermal management interface. AHCI Advanced Host Controller Interface (AHCI) is a SATA Host controller register-level interface.
  • Page 135 TANK-870-Q170 Embedded System Direct Memory Access (DMA) enables some peripheral devices to bypass the system processor and communicate directly with the system memory. DIMM Dual Inline Memory Modules are a type of RAM that offer a 64-bit data bus and have separate electrical contacts on each side of the module. The digital inputs and digital outputs are general control signals that control the on/off circuit of external devices or TTL devices.
  • Page 136 TANK-870-Q170 Embedded System Liquid crystal display (LCD) is a flat, low-power display device that consists of two polarizing plates with a liquid crystal panel in between. LVDS Low-voltage differential signaling (LVDS) is a dual-wire, high-speed differential electrical signaling system commonly used to connect LCD displays to a computer.

  • Page 137: D Safety Precautions

    TANK-870-Q170 Embedded System Appendix Safety Precautions Page 121...

  • Page 138: Safety Precautions

    WARNING: The precautions outlined in this appendix should be strictly followed. Failure to follow these precautions may result in permanent damage to the TANK-870-Q170 Series. Please follow the safety precautions outlined in the sections that follow: D.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times.

  • Page 139: Anti-Static Precautions

    TANK-870-Q170 Series and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the TANK-870-Q170 Series. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the TANK-870-Q170 Series is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to.

  • Page 140: Product Disposal

    The mark on electrical and electronic products only applies to the current European Union Member States. Please follow the national guidelines for electrical and electronic product disposal. D.2 Maintenance and Cleaning Precautions When maintaining or cleaning the TANK-870-Q170 Series, please follow the guidelines below. Page 124...

  • Page 141: Maintenance And Cleaning

    TANK-870-Q170 Embedded System D.2.1 Maintenance and Cleaning Prior to cleaning any part or component of the TANK-870-Q170 Series, please read the details below.  The interior of the TANK-870-Q170 Series does not require cleaning. Keep fluids away from the TANK-870-Q170 Series interior.
  • Page 142 TANK-870-Q170 Embedded System  Cotton swabs - Cotton swaps moistened with rubbing alcohol or water are excellent tools for wiping hard to reach areas.  Foam swabs - Whenever possible, it is best to use lint free swabs such as foam swabs for cleaning.

  • Page 143: E Digital I/O Interface

    TANK-870-Q170 Embedded System Appendix Digital I/O Interface Page 127...

  • Page 144: Introduction

    TANK-870-Q170 Embedded System E.1 Introduction The DIO connector on the TANK-870-Q170 Series is interfaced to GPIO ports on the Super I/O chipset. The DIO has both 4-bit digital inputs and 4-bit digital outputs. The digital inputs and digital outputs are generally control signals that control the on/off circuit of external devices or TTL devices.

  • Page 145: Assembly Language Sample

    TANK-870-Q170 Embedded System E.2 Assembly Language Sample 1 AX, 6F08H ;setting the digital port as input AL low byte = value AH – 6FH Sub-function: AL – 9 :Set the digital port as OUTPUT :Digital I/O input value E.3 Assembly Language Sample 2 AX, 6F09H ;setting the digital port as output BL, 09H...

  • Page 146: F Error Beep Code

    TANK-870-Q170 Embedded System Appendix Error Beep Code Page 130...

  • Page 147: Pei Beep Codes

    TANK-870-Q170 Embedded System F.1 PEI Beep Codes Number of Beeps Description Memory not Installed Memory was installed twice (InstallPeiMemory routine in PEI Core called twice) Recovery started DXEIPL was not found DXE Core Firmware Volume was not found Recovery failed S3 Resume failed Reset PPI is not available F.2 DXE Beep Codes...

  • Page 148: G Hazardous Materials Disclosure

    TANK-870-Q170 Embedded System Appendix Hazardous Materials Disclosure Page 132...

  • Page 149: Rohs Ii Directive (2015/863/Eu)

    TANK-870-Q170 Embedded System G.1 RoHS II Directive (2015/863/EU) The details provided in this appendix are to ensure that the product is compliant with the RoHS II Directive (2015/863/EU). The table below acknowledges the presences of small quantities of certain substances in the product, and is applicable to RoHS II Directive (2015/863/EU).

  • Page 150: China Rohs

    TANK-870-Q170 Embedded System G.2 China RoHS 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些 元件将会单独标示出来。 部件名称 有毒有害物质或元素 壳体 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11364-2014 與 GB/T26572-2011 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11364-2014 與 GB/T26572-2011 标准规定的限量要求。 Page 134...

This manual is also suitable for:

Tank-870-q170i-i5/4g/2a-r10Tank-870-q170i-i5/4g/2b-r10Tank-870-q170i-i5/4g/4a-r10Tank-870-q170i-i5/4g/4b-r10Tank-870-q170i-i7/4g/2a-r10Tank-870-q170i-i7/4g/2b-r10 ... Show all

Table of Contents