IEI Technology ECN-360A-ULT3-C/4G-R10 User Manual
  1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Industrial PC
  5. ECN-360A-ULT3-C/4G-R10
  6. User manual

IEI Technology ECN-360A-ULT3-C/4G-R10 User Manual

High performance fanless embedded system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
E C N-360A-ULT 3 E mbedded S ys tem
MODE L :
E C N-360A -ULT 3
High P erformanc e F anles s E mbedded S ys tem with Intel® C ore™ i5-6300U/
C eleron® 3855U proc es s or, Dual HDMI, R S -232/422/485,
US B 3.0, R oHS C ompliant
Us er Manual
P age i
R ev. 1.01 – 21 J une 2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECN-360A-ULT3-C/4G-R10 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for IEI Technology ECN-360A-ULT3-C/4G-R10

Summary of Contents for IEI Technology ECN-360A-ULT3-C/4G-R10

  • Page 1 E C N-360A-ULT 3 E mbedded S ys tem MODE L : E C N-360A -ULT 3 High P erformanc e F anles s E mbedded S ys tem with Intel® C ore™ i5-6300U/ C eleron® 3855U proc es s or, Dual HDMI, R S -232/422/485, US B 3.0, R oHS C ompliant Us er Manual P age i...
  • Page 2 E C N-360A-ULT 3 E mbedded S ys tem R evis ion Date Version Changes 21 June, 2018 1.01 Updated operating temperature from -20°C ~ 60°C to -20°C ~ 50°C 6 November, 2017 1.00 Initial release P age ii...
  • Page 3 E C N-360A-ULT 3 E mbedded S ys tem C opyright C OP Y R IG HT NOT IC E The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer.
  • Page 4 E C N-360A-ULT 3 E mbedded S ys tem Manual C onventions WAR NING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. C AUT ION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product.

  • Page 5: Table Of Contents

    E C N-360A-ULT 3 E mbedded S ys tem Table of C ontents 1 INTRODUCTION ......................1 1.1 O ........................2 VERVIEW 1.2 M ..................... 2 ODEL ARIATIONS 1.3 F ........................3 EATURES 1.4 T ..................3 ECHNICAL PECIFICATIONS 1.5 F ......................
  • Page 6 E C N-360A-ULT 3 E mbedded S ys tem 4.2.5 Digital I/O Connector ..................27 4.2.6 Fan Connectors ....................28 4.2.7 Front Panel Connector ..................29 4.2.8 Internal DisplayPort Connector ..............30 4.2.9 Keyboard and Mouse Connector ..............31 4.2.10 LVDS Backlight Inverter Connector .............. 32 4.2.11 LVDS LCD Connector ..................
  • Page 7 E C N-360A-ULT 3 E mbedded S ys tem 5 BIOS ..........................62 5.1 I ......................63 NTRODUCTION 5.1.1 Starting Setup ....................63 5.1.2 Using Setup ...................... 63 5.1.3 Getting Help ..................... 64 5.1.4 Unable to Reboot after Configuration Changes ..........64 5.1.5 BIOS Menu Bar ....................
  • Page 8 E C N-360A-ULT 3 E mbedded S ys tem B SAFETY PRECAUTIONS ..................108 B.1 S ..................... 109 AFETY RECAUTIONS B.1.1 General Safety Precautions ................109 B.1.2 Anti-static Precautions .................. 109 B.1.3 Product Disposal .................... 110 B.2 M ............111 AINTENANCE AND LEANING RECAUTIONS...
  • Page 9 E C N-360A-ULT 3 E mbedded S ys tem L is t of F igures Figure 1-1: ECN-360A-ULT3 ......................2 Figure 1-2: ECN-360A-ULT3 Front Panel ..................5 Figure 1-3: ECN-360A-ULT3 Rear Panel ..................6 Figure 1-4: Physical Dimensions (mm) ..................7 Figure 3-1: Unscrew the Cover ....................14 Figure 3-2: Remove the Cover from ECN-360A-ULT3 ...............14 Figure 3-3: HDD Installation ......................15...
  • Page 10 E C N-360A-ULT 3 E mbedded S ys tem Figure 4-20: RS-232/422/485 Connector Location ..............42 Figure 4-21: SATA 6Gb/s Drive Connectors Locations ............43 Figure 4-22: SATA Power Connector Locations ...............44 Figure 4-23: SMBus Connector Location ...................45 Figure 4-24: SIM Card Slot Location ...................46 Figure 4-25: SPI Flash Connector Location ................47 Figure 4-26: SPI Flash Connector Location ................48 Figure 4-27: USB Connector Location ..................49...
  • Page 11 E C N-360A-ULT 3 E mbedded S ys tem L is t of Tables Table 1-1: ECN-360A-ULT3 Model Variations ................2 Table 1-2: Technical Specifications ....................5 Table 4-1: Peripheral Interface Connectors ................21 Table 4-2: Rear Panel Connectors ....................22 Table 4-3: +12V DC-IN Power Connector Pinouts ..............23 Table 4-4: Audio Connector Pinouts ..................24 Table 4-5: Battery Connector Pinouts ..................26 Table 4-6: Buzzer Connector Pinouts ..................26...
  • Page 12 E C N-360A-ULT 3 E mbedded S ys tem Table 4-30: USB 3.0 Port Pinouts ....................53 Table 4-31: AT/ATX Mode Select Switch Settings ..............54 Table 4-32: Flash Descriptor Security Override Jumper Settings ...........55 Table 4-33: HDMI/DP Select Switch Settings ................57 Table 4-34: LVDS Panel Resolution Selection ................58 Table 4-35: LVDS Voltage Select Jumper Settings ..............59 P age xii...
  • Page 13 E C N-360A-ULT 3 E mbedded S ys tem L is t of B IOS Menus BIOS Menu 1: Main ........................65 BIOS Menu 2: Advanced ......................66 BIOS Menu 3: ACPI Settings .......................67 BIOS Menu 4: AMT Configuration ....................68 BIOS Menu 5: F81866 Super IO Configuration ................69 BIOS Menu 6: Serial Port n Configuration .................70 BIOS Menu 7: iWDD H/W Monitor ....................73 BIOS Menu 8: Smart Fan Mode Configuration ................74...

  • Page 14: Introduction

    E C N-360A-ULT 3 E mbedded S ys tem C hapter Introduc tion P age 1...

  • Page 15: Overview

    E C N-360A-ULT 3 E mbedded S ys tem 1.1 Overview Figure 1-1: ECN-360A-ULT3 The ECN-360A-ULT3 is a platform based on Intel® Core™ i5-6300U or Intel® Celeron® 3855U processor. The ECN-360A-ULT3 contains two HDMI video outputs, which can be applied to multi-display application and support high Full HD video quality.

  • Page 16: Features

    E C N-360A-ULT 3 E mbedded S ys tem 1.3 F eatures The ECN-360A-ULT3 features are listed below: On-board CPU  » i5-6300U dual-core up to 3.0GHz » 3855U dual-core up to 1.6GHz Two 2.5" SATA 6Gb/s HDD/SSD drive bay ...
  • Page 17 E C N-360A-ULT 3 E mbedded S ys tem S pec ific ations I/O Interfac es 4 x USB 3.0 ports US B 2 x RJ-45 E thernet LAN1: Intel® I219-LM LAN2: Intel® I211-AT 1 x RS-232/422/485 C OM P ort 2 x RS-232 8-bit Digital I/O Digital I/O...

  • Page 18: Front Panel

    E C N-360A-ULT 3 E mbedded S ys tem S pec ific ations MIL-STD-810F 514.5C-2 (SSD) Operating V ibration 2.2 kg/3 kg W eight (Net/G ros s ) Table 1-2: Technical Specifications 1.5 F ront P anel The ECN-360A-ULT3 front panel contains: 1 x E-Window ...

  • Page 19: Figure 1-3: Ecn-360A-Ult3 Rear Panel

    E C N-360A-ULT 3 E mbedded S ys tem 1 x E-Window  2 x HDMI ports  4 x USB 3.0 ports  1 x Reset button  2 x RJ-45 LAN ports  2 x RS-232 serial ports ...

  • Page 20: Dimensions

    E C N-360A-ULT 3 E mbedded S ys tem 1.7 Dimens ions The physical dimensions are shown below: Figure 1-4: Physical Dimensions (mm) P age 7...

  • Page 21: Unpacking

    E C N-360A-ULT 3 E mbedded S ys tem C hapter Unpac king P age 8...

  • Page 22: Anti - Static Precautions

    E C N-360A-ULT 3 E mbedded S ys tem 2.1 Anti-s tatic P recautions WAR NING : Failure to take ESD precautions during installation may result in permanent damage to the ECN-360A-ULT3 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the ECN-360A-ULT3.

  • Page 23: Npacking Checklist

    E C N-360A-ULT 3 E mbedded S ys tem 2.3 1Unpac king C hec klis t NOT E : If some of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the ECN-360A-ULT3 from or contact an IEI sales representative directly.
  • Page 24 E C N-360A-ULT 3 E mbedded S ys tem The following table lists the optional items that can be purchased separately. Optional FSP060-DIBAN2, 12V 60W AC/DC Adapter (P/N: 63040-010060-120-RS) PCIe mini card supports 1-port GbE with REALTEK RTL8111E controller, with PMS 194C I/O bracket and 150 mm cable (P/N: E-MPCIE-LAN03-R10) PCIe mini card supports PCIe mini card supports...

  • Page 25: Installation

    E C N-360A-ULT 3 E mbedded S ys tem C hapter Ins tallation P age 12...

  • Page 26: Installation Precautions

    E C N-360A-ULT 3 E mbedded S ys tem 3.1 Ins tallation P rec autions During installation, be aware of the precautions below: Read the user manual: The user manual provides a complete description of  the ECN-360A-ULT3, installation instructions and configuration options. DANGER! Disconnect Power: Power to the ECN-360A-ULT3 must be ...

  • Page 27: Figure 3-1: Unscrew The Cover

    E C N-360A-ULT 3 E mbedded S ys tem Figure 3-1: Unscrew the Cover S tep 2: Unplug the SATA signal and power cables connected to the ECN-360A-ULT3, and then put the cover on a flat surface (Figure 3-2). Figure 3-2: Remove the Cover from ECN-360A-ULT3 Attach the HDD to the HDD bracket, and then secure the HDD with the HDD S tep 3: bracket by four retention screws (Figure 3-3).

  • Page 28: So-Dimm Installation

    E C N-360A-ULT 3 E mbedded S ys tem Figure 3-3: HDD Installation Reconnect the SATA signal and power cables to the ECN-360A-ULT3. S tep 4: Reinstall the cover. S tep 5: 3.3 S O-DIMM Ins tallation WARNING: Using incorrectly specified SO-DIMM may cause permanently damage the ECN-360A-ULT3.

  • Page 29: Figure 3-4: So-Dimm Socket

    E C N-360A-ULT 3 E mbedded S ys tem Figure 3-4: SO-DIMM Socket S tep 3: Align the SO-DIMM with the socket. The SO-DIMM must be oriented in such a way that the notch in the middle of the SO-DIMM must be aligned with the plastic bridge in the socket (Figure 3-5).

  • Page 30: Mounting The System With Mounting Brackets

    E C N-360A-ULT 3 E mbedded S ys tem Reinstall the cover that was previously removed in the same position it was S tep 7: before. 3.4 Mounting the S ys tem with Mounting B rac kets To mount the embedded system onto a wall or some other surface using the two mounting brackets, please follow the steps below.

  • Page 31: Powering O N /Off The System

    E C N-360A-ULT 3 E mbedded S ys tem 3.5 P owering On/Off the S ys tem WARNING: Make sure a power supply with the correct input voltage is being fed into the system. Incorrect voltages applied to the system may cause damage to the internal electronic components and may also cause injury to the user.

  • Page 32: System Motherboard

    E C N-360A-ULT 3 E mbedded S ys tem C hapter S ys tem Motherboard P age 19...

  • Page 33: Peripheral Interface Connectors

    E C N-360A-ULT 3 E mbedded S ys tem 4.1 P eripheral Interfac e C onnec tors This chapter details all the jumpers and connectors. 4.1.1 L ayout The figures below show all the connectors and jumpers. Figure 4-1: Connector and Jumper Locations 4.1.2 P eripheral Interfac e C onnec tors The table below lists all the connectors on the board.

  • Page 34: Table 4-1: Peripheral Interface Connectors

    E C N-360A-ULT 3 E mbedded S ys tem Digital I/O connector 10-pin header DIO1 Debug card connector 12-pin wafer DBG_PORT1 Fan connector, CPU 4-pin wafer CPU/FAN1 Fan connector, system 4-pin wafer SYS/FAN1 Front panel connector 6-pin wafer CN11 Internal DisplayPort connector 20-pin box header Keyboard &...

  • Page 35: External Interface Panel Connectors

    E C N-360A-ULT 3 E mbedded S ys tem 4.1.3 E xternal Interfac e P anel C onnec tors The table below lists the connectors on the external I/O panel. Connector Type Label LAN connectors RJ-45 LAN1, LAN2 HDMI connectors HDMI HDMI1, HDMI2 USB 3.0 connectors...

  • Page 36: Internal Peripheral Connectors

    E C N-360A-ULT 3 E mbedded S ys tem 4.2 Internal P eripheral C onnec tors The section describes all of the connectors on the ECN-360A-ULT3. 4.2.1 +12V DC -IN P ower C onnec tor C N L abel: C N10 4-pin Molex, p=4.2 mm C N T ype: See Figure 4-2...

  • Page 37: Figure 4-3: Audio Connector Location

    E C N-360A-ULT 3 E mbedded S ys tem 10-pin header, p=2.00 mm C N T ype: See Figure 4-3 C N L oc ation: See Table 4-4 C N P inouts : The audio connector is connected to external audio devices including speakers and microphones for the input and output of audio signals to and from the system.

  • Page 38: Battery Connector

    E C N-360A-ULT 3 E mbedded S ys tem 4.2.3 B attery C onnec tor CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations.

  • Page 39: Buzzer Connector

    E C N-360A-ULT 3 E mbedded S ys tem Description VBAT+ Table 4-5: Battery Connector Pinouts 4.2.4 B uzzer C onnec tor C N L abel: 2-pin wafer, p=1.25 mm C N T ype: C N L oc ation: See Figure 3-5 See Table 4-6 C N P inouts : The buzzer connector is connected to the buzzer.

  • Page 40: Digital I/O Connector

    E C N-360A-ULT 3 E mbedded S ys tem 4.2.5 Digital I/O C onnec tor C N L abel: DIO1 10-pin header, p=2.00 mm C N T ype: See Figure 4-6 C N L oc ation: See Table 4-7 C N P inouts : The 8-bit digital I/O connector provides programmable input and output for external devices.

  • Page 41: Fan Connectors

    E C N-360A-ULT 3 E mbedded S ys tem 4.2.6 F an C onnec tors C N L abel: C P U/F AN1, S Y S /F AN1 4-pin wafer, p=2.54 mm C N T ype: See Figure 4-7 C N L oc ation: See Table 4-8 C N P inouts : The fan connector attaches to a cooling fan.

  • Page 42: Front Panel Connector

    E C N-360A-ULT 3 E mbedded S ys tem 4.2.7 F ront P anel C onnec tor C N L abel: C N11 6-pin wafer, p=2.00 mm C N T ype: See Figure 4-8 C N L oc ation: See Table 4-9 C N P inouts : The front panel connector connects to the power LED indicator and HDD LED indicator on the system front panel.

  • Page 43: Internal Displayport Connector

    E C N-360A-ULT 3 E mbedded S ys tem 4.2.8 Internal Dis playP ort C onnec tor NOTE: The iDP connector is disabled by default since the iDP connector is co-lay with the HDMI1 connector. To enable the iDP connector, use the HDMI/DP select switch to configure the settings.

  • Page 44: Keyboard And Mouse Connector

    E C N-360A-ULT 3 E mbedded S ys tem Description Description AUX+ AUX- Lane2+ Lane3+ Lane2- Lane3- Lane0+ Lane1+ Lane0- Lane1- VCC3 VCC5 Table 4-10: Internal DisplayPort Connector Pinouts 4.2.9 K eyboard and Mous e C onnec tor C N L abel: K B /MS 1 6-pin wafer, p=2.00 mm C N T ype:...

  • Page 45: Lvds Backlight Inverter Connector

    E C N-360A-ULT 3 E mbedded S ys tem Description VCC5V Mouse Data Mouse Clock Keyboard Data Keyboard Clock Table 4-11: Keyboard and Mouse Connector Pinouts 4.2.10 LV DS B ac klight Inverter C onnec tor C N L abel: INV 1 5-pin wafer, p=2.00 mm C N T ype:...

  • Page 46: Lvds Lcd Connector

    E C N-360A-ULT 3 E mbedded S ys tem 4.2.11 LV DS L C D C onnec tor C N L abel: C N2 30-pin crimp, p=1.25 mm C N T ype: See Figure 4-12 C N L oc ation: See Table 4-13 C N P inouts : The LVDS connector is for an LCD panel to connect to the board.

  • Page 47: Lan Led Connectors

    E C N-360A-ULT 3 E mbedded S ys tem Description Description +LCD VCC +LCD VCC +LCD VCC +LCD VCC Table 4-13: LVDS Connector Pinouts 4.2.12 L AN L E D C onnec tors C N L abel: J P 1, J P 2 2-pin header, p=2.00 mm C N T ype: See Figure 4-13...

  • Page 48: Pcie Mini Card Slot, Full-Size

    E C N-360A-ULT 3 E mbedded S ys tem 4.2.13 P C Ie Mini C ard S lot, F ull-s ize C N L abel: C N8 Full-size PCIe Mini card slot C N T ype: See Figure 4-14 C N L oc ation: See Table 4-15 C N P inouts : The PCIe Mini card slot supports PCIe Mini cards with USB interface, including mSATA...

  • Page 49: Table 4-15: Full-Size Pcie Mini Card Slot Pinouts

    E C N-360A-ULT 3 E mbedded S ys tem Description Description PCIE_WAKE# VCC3 1.5 V VCC3 SIM_VCC SIM_IO CLK- SIM_CLK CLK+ SIM_RST SIM_VPP BUF_PLT_RST# VCC3 BUF_PLT_RST# SATA_RXN2_C VCC3 SATA_RXP2_C 1.5 V SMBCLK SATA_TXN2 SMBDATA SATA_TXP2 USB7- USB7+ VCC3 VCC3 RF_LINK# BLUELED# 1.5 V M-SATADET...

  • Page 50: Pcie Mini Card Slot, Half-Size

    E C N-360A-ULT 3 E mbedded S ys tem 4.2.14 P C Ie Mini C ard S lot, Half-s ize C N L abel: C N1 Half-size PCIe Mini card slot C N T ype: See Figure 4-15 C N L oc ation: See Table 4-16 C N P inouts : The PCIe Mini card slot is for installing a half-size PCIe Mini expansion card with USB...

  • Page 51: Power Button

    E C N-360A-ULT 3 E mbedded S ys tem Description Description BUF_PLT_RST# VCC3 BUF_PLT_RST# PCIE_RX4DN VCC3 PCIE_RX4DP 1.5V SMBCLK PCIE_TX4DN SMBDATA PCIE_TX4DP USBD8- USBD8+ VCC3 VCC3 RF_LINK# BLUELED# 1.5 V VCC3 Table 4-16: Half-size PCIe Mini Slot Pinouts 4.2.15 P ower B utton C N L abel: P W R _S W 1 Push button...

  • Page 52: Power Button Connector

    E C N-360A-ULT 3 E mbedded S ys tem Figure 4-16: Power Button Location 4.2.16 P ower B utton C onnec tor C N L abel: P W R _B T N1 2-pin wafer, p=2.00 mm C N T ype: C N L oc ation: See Figure 4-17 See Table 4-17...

  • Page 53: Reset Button Connector

    E C N-360A-ULT 3 E mbedded S ys tem 4.2.17 R es et B utton C onnec tor C N L abel: R S T _B T N1 2-pin wafer, p=2.00 mm C N T ype: See Figure 4-18 C N L oc ation: See Table 4-18 C N P inouts : The reset button connector is connected to a reset switch on the system chassis to enable...

  • Page 54: Serial Port Connectors

    E C N-360A-ULT 3 E mbedded S ys tem 4.2.18 R S -232 S erial P ort C onnec tors C N L abel: C OM1, C OM2 10-pin header, p=2.00 mm C N T ype: See Figure 4-19 C N L oc ation: See Table 4-19 C N P inouts : The serial connector provides RS-232 connection.

  • Page 55: Rs-232/422/485 Serial Port Connector

    E C N-360A-ULT 3 E mbedded S ys tem 4.2.19 R S -232/422/485 S erial P ort C onnec tor C N L abel: C OM3 10-pin header, p=2.00 mm C N T ype: See Figure 4-20 C N L oc ation: See Table 4-20 C N P inouts : This connector provides RS-232, RS-422 or RS-485 communications.

  • Page 56: Sata 6Gb/S Drive Connectors

    E C N-360A-ULT 3 E mbedded S ys tem Use the optional RS-422/485 cable to connect to a serial device. The pinouts of the DB-9 connector are listed below. RS-422 Pinouts RS-485 Pinouts Table 4-21: DB-9 RS-422/485 Pinouts 4.2.20 S ATA 6G b/s Drive C onnec tors SATA1, SATA2 C N L abel: 7-pin SATA connector...

  • Page 57: Sata Power Connectors

    E C N-360A-ULT 3 E mbedded S ys tem 4.2.21 S ATA P ower C onnec tors SATA_PWR1, SATA_PWR2 C N L abel: 2-pin wafer, p=2.00 mm C N T ype: See Figure 4-22 C N L oc ation: See Table 4-22 C N P inouts : The SATA power connector provides +5 V power output to the SATA connector.

  • Page 58: Smbus Connector

    E C N-360A-ULT 3 E mbedded S ys tem 4.2.22 S MB us C onnec tor C N L abel: C N5 4-pin wafer, p=1.25 mm C N T ype: See Figure 4-23 C N L oc ation: See Table 4-23 C N P inouts : The SMBus (System Management Bus) connector provides low-speed system management communications.

  • Page 59: Sim Card Slot

    E C N-360A-ULT 3 E mbedded S ys tem 4.2.23 S IM C ard S lot C N L abel: S IM1 SIM card slot C N T ype: See Figure 4-24 C N L oc ation: The SIM card slot accepts a SIM card for 3G network communication. Figure 4-24: SIM Card Slot Location P age 46...

  • Page 60: Spi Flash Connector, Bios

    E C N-360A-ULT 3 E mbedded S ys tem 4.2.24 S P I F las h C onnec tor, B IOS C N L abel: J S P I1 6-pin wafer, p=1.25 mm C N T ype: See Figure 4-25 C N L oc ation: See Table 4-24 C N P inouts :...

  • Page 61: Spi Flash Connector, Ec

    E C N-360A-ULT 3 E mbedded S ys tem 4.2.25 S P I F las h C onnec tor, E C C N L abel: J S P I2 6-pin wafer, p=1.25 mm C N T ype: See Figure 4-26 C N L oc ation: See Table 4-25 C N P inouts :...

  • Page 62: Usb Connector

    E C N-360A-ULT 3 E mbedded S ys tem 4.2.26 US B C onnec tor USB1 C N L abel: 8-pin header, p=2.00 mm C N T ype: See Figure 4-27 C N L oc ation: See Table 4-26 C N P inouts : The USB connector provides two USB 2.0 ports by dual-port USB cable.

  • Page 63: Usb Connector, Type A

    E C N-360A-ULT 3 E mbedded S ys tem 4.2.27 US B C onnec tor, Type A USB2 C N L abel: USB Type A C N T ype: See Figure 4-27 C N L oc ation: See Table 4-26 C N P inouts : The USB connector can be connected to USB 2.0 devices.

  • Page 64: External Peripheral Interface Connector Panel

    E C N-360A-ULT 3 E mbedded S ys tem 4.3 E xternal P eripheral Interfac e C onnec tor P anel Figure 4-29 shows the ECN-360A-ULT3 external peripheral interface connector (EPIC) panel. The EPIC panel consists of the following: 2 x GbE connector ...

  • Page 65: Lan Connectors

    E C N-360A-ULT 3 E mbedded S ys tem Description Description HDMI_SCL HDMI_SDA HDMI_HPD HDMI_GND HDMI_GND HDMI_GND HDMI_GND Table 4-28: HDMI Connector Pinouts Figure 4-30: HDMI Connector Pinout Locations NOTE: The HDMI1 connector is co-lay with the iDP connector. When the iDP connector is enabled, the HDMI1 connector will be disabled.

  • Page 66: Usb Connectors

    E C N-360A-ULT 3 E mbedded S ys tem Figure 4-31: LAN Connector Description Description TRD0+ TRD2+ TRD0- TRD2- TRD1+ TRD3+ TRD1- TRD3- Table 4-29: LAN Pinouts 4.3.3 US B C onnec tors C N L abel: US B _C ON1, US B _C ON2 USB 3.0 port C N T ype: See Figure 4-29...

  • Page 67: System Configuration

    E C N-360A-ULT 3 E mbedded S ys tem 4.4 S ys tem C onfiguration The system configuration is controlled by buttons, jumpers and switches. The system configuration should be performed before installation. 4.4.1 AT /AT X Mode S elec t S witc h J_ATX_AT1 C N L abel: Switch...

  • Page 68: Flash Descriptor Security Override Jumper

    E C N-360A-ULT 3 E mbedded S ys tem See Figure 4-33 C N L oc ation: If the ECN-360A-ULT3 fails to boot due to improper BIOS settings, use the button to clear the CMOS data and reset the system BIOS information. The location of the clear CMOS button is shown in Figure 4-33 Figure 4-33: Clear CMOS Button Location 4.4.3 F las h Des c riptor S ec urity O verride J umper...

  • Page 69: Hdmi/Dp Select Switch

    E C N-360A-ULT 3 E mbedded S ys tem Figure 4-34: Flash Descriptor Security Override Jumper Location To update the ME firmware, please follow the steps below. Before turning on the system power, short the Flash Descriptor Security S tep 1: Override jumper.

  • Page 70: Lvds Panel Resolution Select Switch

    E C N-360A-ULT 3 E mbedded S ys tem Setting Description Enable HDMI1 and disable DisplayPort (DP1) Short A-B (Default) Short B-C Disable HDMI1 and enable DisplayPort (DP1) Table 4-33: HDMI/DP Select Switch Settings The location of the HDMI/DP select switch is shown in Figure 4-32 below. Figure 4-35: HDMI/DP Select Switch Location 4.4.5 LV DS P anel R es olution S elec t S witc h J umper L abel:...

  • Page 71: Figure 4-36: Lvds Panel Resolution Select Switch Location

    E C N-360A-ULT 3 E mbedded S ys tem SW1 (4-3-2-1) Description 0000 800x600 18-bit S (default) 0001 1024x768 18-bit S 0010 1024x768 24-bit S 0011 1280x768 18-bit S 0100 1280x800 18-bit S 0101 1280x960 18-bit S 0110 1280x1024 24-bit D 0111 1366x768 18-bit S 1000...

  • Page 72: Lvds Voltage Select Jumper

    E C N-360A-ULT 3 E mbedded S ys tem 4.4.6 LV DS Voltage S elec t J umper WARNING: Permanent damage to the screen and ECN-360A-ULT3 may occur if the wrong voltage is selected with this jumper. Please refer to the user guide that came with the monitor to select the correct voltage.

  • Page 73: Driver Download

    E C N-360A-ULT 3 E mbedded S ys tem 4.5 Driver Download To download drivers from IEI Resource Download Center, follow the steps below. Go to https://download.ieiworld.com. Type ECN-360A-ULT3 and press Enter. S tep 1: All product-related software, utilities, and documentation will be listed. You can S tep 2: choose Driver to filter the result.
  • Page 74 E C N-360A-ULT 3 E mbedded S ys tem NOTE: To install software from the downloaded ISO image file in Windows 8, 8.1 or 10, double-click the ISO file to mount it as a virtual drive to view its content. On Windows 7 system, an additional tool (such as Virtual CD-ROM Control Panel from Microsoft) is needed to mount the file.

  • Page 75: Bios

    E C N-360A-ULT 3 E mbedded S ys tem C hapter B IOS P age 62...

  • Page 76: Introduction

    E C N-360A-ULT 3 E mbedded S ys tem 5.1 Introduc tion The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. NOTE: Some of the BIOS options may vary throughout the life cycle of the product and are subject to change without prior notice.

  • Page 77: Getting Help

    E C N-360A-ULT 3 E mbedded S ys tem K ey F unc tion Decrease the numeric value or make changes F1 key General help, only for Status Page Setup Menu and Option Page Setup Menu F2 key Load previous values. F3 key Load optimized defaults F4 key...

  • Page 78: Main

    E C N-360A-ULT 3 E mbedded S ys tem 5.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc. Main Advanced Chipset Security Boot Save &...

  • Page 79: Advanced

    E C N-360A-ULT 3 E mbedded S ys tem The System Overview field also has two user configurable fields:  S ys tem Date [x x/x x/xx] Use the System Date option to set the system date. Manually enter the day, month and year.

  • Page 80: Acpi Settings

    E C N-360A-ULT 3 E mbedded S ys tem 5.3.1 AC P I S ettings The ACPI Settings menu (BIOS Menu 3) configures the Advanced Configuration and Power Interface (ACPI) options. Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc. Advanced ACPI Settings Select the highest ACPI...

  • Page 81: Amt Configuration

    E C N-360A-ULT 3 E mbedded S ys tem 5.3.2 AMT C onfiguration The AMT Configuration menu (BIOS Menu 4) allows Intel® Active Management Technology (AMT) options to be configured. Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc. Advanced Intel AMT [Enabled]...

  • Page 82: F81866 Super Io Configuration

    E C N-360A-ULT 3 E mbedded S ys tem  Enabled To perform ME unconfigure 5.3.3 F 81866 S uper IO C onfiguration Use the F81866 Super IO Configuration menu (BIOS Menu 5) to set or change the configurations for the serial ports. Aptio Setup Utility –...

  • Page 83: Serial Port N Configuration

    E C N-360A-ULT 3 E mbedded S ys tem 5.3.3.1 S erial P ort n C onfiguration Use the Serial Port n Configuration menu (BIOS Menu 6) to configure the serial port n. Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc. Advanced Serial Port 1 Configuration Enable or Disable Serial...
  • Page 84 E C N-360A-ULT 3 E mbedded S ys tem  IO=3F8h; IRQ=3, Serial Port I/O port address is 3F8h and the 4,5,6,7,9,10,11,12 interrupt address is IRQ3,4,5,6,7,9,10,11,12  IO=2F8h; IRQ=3, Serial Port I/O port address is 2F8h and the 4,5,6,7,9,10,11,12 interrupt address is IRQ3,4,5,6,7,9,10,11,12 ...
  • Page 85 E C N-360A-ULT 3 E mbedded S ys tem  IO=2E8h; IRQ=3, Serial Port I/O port address is 2E8h and the 4,5,6,7,9,10,11,12 interrupt address is IRQ3,4,5,6,7,9,10,11,12 5.3.3.1.3 S erial P ort 3 C onfiguration S erial P ort [E nabled] ...

  • Page 86: Iwdd H/W Monitor

    E C N-360A-ULT 3 E mbedded S ys tem  Devic e Mode [R S 232] Use the Device Mode option to select the Serial Port 3 signaling mode.  RS422 Serial Port 3 signaling mode is RS-422  RS232 Serial Port 3 signaling mode is RS-232 EFAULT ...

  • Page 87: Smart Fan Mode Configuration

    E C N-360A-ULT 3 E mbedded S ys tem System temperature Fan Speed:  CPU Fan Speed System Fan Speed Voltages  CPU_CORE +12V +DDR +5VSB +3.3V +3.3VSB 5.3.4.1 S mart F an Mode C onfiguration Use the Smart Fan Mode Configuration submenu (BIOS Menu 8) to configure fan temperature and speed settings.
  • Page 88 E C N-360A-ULT 3 E mbedded S ys tem  Manual Mode The fan spins at the speed set in the Manual EFAULT Mode option  Auto Mode The fan adjusts its speed using these EFAULT settings: Auto mode fan start temperature Auto mode fan off temperature Auto mode fan start PWM Auto mode fan slope PWM...
  • Page 89 E C N-360A-ULT 3 E mbedded S ys tem value, select the Auto mode fan start temperature option and enter a decimal number between 1 and 100. Auto mode fan off temperature [40]  WARNING: Setting this value too high may cause the fan to speed up only when the CPU is at a very high temperature and therefore cause the system to be damaged.

  • Page 90: Rtc Wake Settings

    E C N-360A-ULT 3 E mbedded S ys tem 5.3.5 R T C Wake S ettings The RTC Wake Settings menu (BIOS Menu 9) configures RTC wake event. Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc. Advanced Wake system with Fixed Time [Disabled] Enable or disable System wake on alarm event.

  • Page 91: Serial Port Console Redirection

    E C N-360A-ULT 3 E mbedded S ys tem Wake up second After setting the alarm, the computer turns itself on from a suspend state when the alarm goes off. 5.3.6 S erial P ort C ons ole R edirec tion The Serial Port Console Redirection menu (BIOS Menu 10) allows the console redirection options to be configured.

  • Page 92: Legacy Console Redirection Settings

    E C N-360A-ULT 3 E mbedded S ys tem 5.3.6.1 L egac y C ons ole R edirec tion S ettings The Legacy Console Redirection Settings menu (BIOS Menu 11) allows the legacy console redirection options to be configured. Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc. Advanced Select a COM port to Legacy Serial Redirection Port...

  • Page 93: Console Redirection Settings

    E C N-360A-ULT 3 E mbedded S ys tem 5.3.6.2 C ons ole R edirec tion S ettings The Console Redirection Settings menu (BIOS Menu 12) allows the console redirection options to be configured. The option is active when Console Redirection option is enabled. Aptio Setup Utility –...
  • Page 94 E C N-360A-ULT 3 E mbedded S ys tem  B its per s ec ond [115200] Use the Bits per second option to specify the serial port transmission speed. The speed must match the other side. Long or noisy lines may require lower speeds. ...

  • Page 95: Cpu Configuration

    E C N-360A-ULT 3 E mbedded S ys tem  S top B its [1] Use the Stop Bits option to specify the number of stop bits used to indicate the end of a serial data packet. Communication with slow devices may require more than 1 stop bit. ...
  • Page 96 E C N-360A-ULT 3 E mbedded S ys tem Use the Hyper-Threading BIOS option to enable or disable the Intel Hyper-Threading Technology.  Disabled Disables the Intel Hyper-Threading Technology.  Enabled Enables the Intel Hyper-Threading Technology. EFAULT  Ac tive P roc es s or C ores [All] Use the Active Processor Cores BIOS option to enable numbers of cores in the processor package.

  • Page 97: Sata Configuration

    E C N-360A-ULT 3 E mbedded S ys tem  Enabled Enables CPU C states. 5.3.8 S ATA C onfiguration Use the SATA Configuration menu (BIOS Menu 14) to change and/or set the configuration of the SATA devices installed in the system. Aptio Setup Utility –...
  • Page 98 E C N-360A-ULT 3 E mbedded S ys tem NOTE: Before accessing the RAID configuration utility, ensure to set the Option ROM Messages BIOS option in the Boot menu to Force BIOS. This is to allow the “Press <CTRL+I> to enter Configuration Utility……”...

  • Page 99: Usb Configuration

    E C N-360A-ULT 3 E mbedded S ys tem 5.3.9 US B C onfiguration Use the USB Configuration menu (BIOS Menu 15) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc. Advanced USB Configuration Enables Legacy USB...

  • Page 100: Iei Feature

    E C N-360A-ULT 3 E mbedded S ys tem  Enabled Legacy USB support enabled EFAULT  Disabled Legacy USB support disabled  Auto Legacy USB support disabled if no USB devices are connected 5.3.10 IE I F eature Use the IEI Feature menu (BIOS Menu 16) to configure One Key Recovery function. Aptio Setup Utility –...

  • Page 101: Chipset

    E C N-360A-ULT 3 E mbedded S ys tem 5.4 C hips et Use the Chipset menu (BIOS Menu 17) to configure the system chipset. Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc. Main Advanced Chipset Boot Security Save &...

  • Page 102: Graphics Configuration

    E C N-360A-ULT 3 E mbedded S ys tem  V T-d [Dis abled] Use the VT-d option to enable or disable VT-d support.  Disabled Disable VT-d support. EFAULT  Enabled Enable VT-d support. 5.4.1.1 G raphic s C onfiguration Use the Graphics Configuration menu (BIOS Menu 19) to configure the graphics settings.
  • Page 103 E C N-360A-ULT 3 E mbedded S ys tem  Internal G raphic s [E nabled] Use the Internal Graphics option to enable or disable the internal graphics device.  Auto The internal graphics device is automatically detected and enabled. ...

  • Page 104: Bios Menu 20: Lcd Control

    E C N-360A-ULT 3 E mbedded S ys tem 5.4.1.1.1 L C D C ontrol Use the LCD Control submenu (BIOS Menu 20) to select a display device which will be activated during POST. Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc. Chipset LCD Control Select the Video Device...
  • Page 105 E C N-360A-ULT 3 E mbedded S ys tem  HDMI1  EFAULT On board LV DS [E nabled]  Use the On board LVDS option enables or disables the on-board LVDS connector.  Disabled The on-board LVDS connector is disabled. ...

  • Page 106: Memory Configuration

    E C N-360A-ULT 3 E mbedded S ys tem 5.4.1.2 Memory C onfiguration Use the Memory Configuration submenu (BIOS Menu 21) to display the memory information. Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc. Chipset Memory Information Total Memory 4096 MB DIMM1 Not Present...

  • Page 107: Pci Express Configuration

    E C N-360A-ULT 3 E mbedded S ys tem  R es tore AC P ower L os s [L as t S tate] Use the Restore AC Power BIOS option to specify what state the system returns to if there is a sudden loss of power to the system.
  • Page 108 E C N-360A-ULT 3 E mbedded S ys tem  F ull S ize P C IE Mini C ard S elec tion [P C IE ] Use the Full Size PCIE Mini Card Selection BIOS option to configure the full-size PCIe Mini slot (CN8) as PCIe Mini slot or mSATA slot.

  • Page 109: Hd Audio Configuration

    E C N-360A-ULT 3 E mbedded S ys tem 5.4.2.2 HD Audio C onfiguration Use the HD Audio Configuration submenu (BIOS Menu 24) to configure the High Definition Audio codec. Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc. Chipset HD Audio Configuration Control Detection of the...

  • Page 110: Security

    E C N-360A-ULT 3 E mbedded S ys tem 5.5 S ec urity Use the Security menu (BIOS Menu 25) to set system and user passwords. Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc. Main Advanced Chipset Security Boot Save &...

  • Page 111: Boot

    E C N-360A-ULT 3 E mbedded S ys tem 5.6 B oot Use the Boot menu (BIOS Menu 26) to configure system boot options. Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Boot Configuration Select the keyboard Bootup NumLock State...
  • Page 112 E C N-360A-ULT 3 E mbedded S ys tem  Quiet B oot [E nabled] Use the Quiet Boot BIOS option to select the screen display when the system boots.  Disabled Normal POST messages displayed  Enabled OEM Logo displayed instead of POST messages EFAULT UE F I B oot [Dis abled] ...

  • Page 113: Exit

    E C N-360A-ULT 3 E mbedded S ys tem 5.7 E xit Use the Exit menu (BIOS Menu 27) to load default BIOS values, optimal failsafe values and to save configuration changes. Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc. Main Advanced Chipset...
  • Page 114 E C N-360A-ULT 3 E mbedded S ys tem  S ave as Us er Defaults Use the Save as User Defaults option to save the changes done so far as user defaults. R es tore Us er Defaults  Use the Restore User Defaults option to restore the user defaults to all the setup options.

  • Page 115: A Regulatory Compliance

    E C N-360A-ULT 3 E mbedded S ys tem Appendix R egulatory C omplianc e P age 102...
  • Page 116 E C N-360A-ULT 3 E mbedded S ys tem DE C L AR AT ION OF C ONF OR MIT Y This equipment is in conformity with the following EU directives: EMC Directive (2004/108/EC, 2014/30/EU)  Low-Voltage Directive (2006/95/EC, 2014/35/EU) ...
  • Page 117 E C N-360A-ULT 3 E mbedded S ys tem Deutsch [German] IEI Integration Corp, erklärt dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 2014/53/EU. Eesti [Estonian] IEI Integration Corp deklareerib seadme seadme vastavust direktiivi 2014/53/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
  • Page 118 E C N-360A-ULT 3 E mbedded S ys tem Lietuvių [Lithuanian] IEI Integration Corp deklaruoja, kad šis įranga atitinka esminius reikalavimus ir kitas 2014/53/EU Direktyvos nuostatas. Nederlands [Dutch] IEI Integration Corp dat het toestel toestel in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 2014/53/EU.
  • Page 119 E C N-360A-ULT 3 E mbedded S ys tem Slovensko [Slovenian] IEI Integration Corp izjavlja, da je ta opreme v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 2014/53/EU. Slovensky [Slovak] IEI Integration Corp týmto vyhlasuje, že zariadenia spĺňa základné požiadavky a všetky príslušné...
  • Page 120 E C N-360A-ULT 3 E mbedded S ys tem F C C WAR NING This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and ...

  • Page 121: B Safety Precautions

    E C N-360A-ULT 3 E mbedded S ys tem Appendix S afety P rec autions P age 108...

  • Page 122: General Safety Precautions

    E C N-360A-ULT 3 E mbedded S ys tem B .1 S afety P rec autions WAR NING : The precautions outlined in this appendix should be strictly followed. Failure to follow these precautions may result in permanent damage to the ECN-360A-ULT3.

  • Page 123: Product Disposal

    E C N-360A-ULT 3 E mbedded S ys tem Electrostatic discharge (ESD) can cause serious damage to electronic components, including the ECN-360A-ULT3. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the ECN-360A-ULT3 is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to.

  • Page 124: Maintenance And Cleaning Precautions

    E C N-360A-ULT 3 E mbedded S ys tem EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes monitors and electrical accessories, such as signal cables or power cords. When you need to dispose of your device, please follow the guidance of your local authority, or ask the shop where you purchased the product.
  • Page 125 E C N-360A-ULT 3 E mbedded S ys tem  C loth – Although paper towels or tissues can be used, a soft, clean piece of  cloth is recommended when cleaning the ECN-360A-ULT3. Water or rubbing alcohol – A cloth moistened with water or rubbing alcohol ...

  • Page 126: C Watchdog Timer

    E C N-360A-ULT 3 E mbedded S ys tem Appendix Watc hdog T imer P age 113...
  • Page 127 E C N-360A-ULT 3 E mbedded S ys tem NOT E : The following discussion applies to DOS environment. Contact IEI support or visit the IEI website for specific drivers for other operating systems. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash.
  • Page 128 E C N-360A-ULT 3 E mbedded S ys tem NOT E : When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. E X AMP L E P R OG R AM: ; INITIAL TIMER PERIOD COUNTER W_LOOP: AX, 6F02H ;setting the time-out value...

  • Page 129: D Hazardous Materials Disclosure

    E C N-360A-ULT 3 E mbedded S ys tem Appendix Hazardous Materials Dis c los ure P age 116...
  • Page 130 E C N-360A-ULT 3 E mbedded S ys tem The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
  • Page 131 E C N-360A-ULT 3 E mbedded S ys tem 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯 醚 (P b) (Hg) (C d) (C R (V I)) (P B B ) (P B DE ) 壳体...

This manual is also suitable for:

Ecn-360a-ult3Ecn-360a-ult3-i5/wd/4g-r10Ecn-360a-ult3-i5/4g-r10Ecn-360a-ult3-ce/4g-r10Ecn-360a-ult3-ce/wd/4g-r10

Table of Contents