Wireless Antenna Installation (Wireless Models Only); Figure 4-16: Mounting The Din Rail; Figure 4-17: Secure The Assembly To The Din Rail - IEI Technology ECW-281B-D525 User Manual

Figure 4-16: Mounting the DIN RAIL

Secure the DIN rail to the mounting bracket by turning the top screw clockwise.
Step 4:
This draws the lower clamp up and secures the embedded system to the DIN
rail (
F igure 4-17).
7 6 4

Figure 4-17: Secure the Assembly to the DIN Rail

4.2.9 Wireless Antenna Installation (Wireless Models Only)

To install an antenna to the wireless ECW-281B/B2-D525 series for efficient wireless
network transmission, follow the steps below.
Locate the antenna connector on the rear panel of the embedded system (refer
Step 1:
to
F igure 2-3).
7 6 4
Install the antenna to the antenna connector (
Step 2:
Page 46
ECW-281B/B2-D525 Embedded System
F igure 4-18).
7 6 4