Terminal Block Pinouts; Power-On Procedure; Figure 4-19: Terminal Block Pinouts - IEI Technology ECW-281B-D525 User Manual

 All peripheral devices (VGA monitor, serial communications devices etc.) are
connected
The power cables are plugged in

The system is securely mounted


4.3.2 Terminal Block Pinouts

The terminal block pinouts are shown in

Figure 4-19: Terminal Block Pinouts

The chassis ground is connected to the ECW chassis internally. The cable ground is
connected to the ground pin on the input power connector of the power module.

4.3.3 Power-on Procedure

To power-on the ECW-281B/B2-D525 please follow the steps below:
Push the power button.
Step 1:
Once turned on, the power button should turns to blue. See
Step 2:
Step 0:
Page 48
ECW-281B/B2-D525 Embedded System
F igure 4-19.
7 6 4
F igure 4-20.
7 6 4