Safety Precautions; General Safety Precautions - IEI Technology ECW-281B-D525 User Manual

WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the ECW-281B/B2-D525.
A.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
A.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
 Follow the electrostatic precautions outlined below whenever the
ECW-281B/B2-D525 is opened.

Make sure the power is turned off and the power cord is disconnected
whenever the ECW-281B/B2-D525 is being installed, moved or modified.

Do not apply voltage levels that exceed the specified voltage range.
Doing so may cause fire and/or an electrical shock.
Electric shocks can occur if the ECW-281B/B2-D525 chassis is opened

when the ECW-281B/B2-D525 is running.
 Do not drop or insert any objects into the ventilation openings of the
ECW-281B/B2-D525.

If considerable amounts of dust, water, or fluids enter the
ECW-281B/B2-D525, turn off the power supply immediately, unplug the
power cord, and contact the ECW-281B/B2-D525 vendor.

DO NOT:
Drop the ECW-281B/B2-D525 against a hard surface.
o
In a site where the ambient temperature exceeds the rated temperature
o
Page 86
ECW-281B/B2-D525 Embedded System