Selecting The Noise Reduction Factor; Selecting The Image Intensifier Format; Setting Image Reversal - Siemens ARCADIS Varic Operator's Manual

ARCADIS Varic
SPR2-310.620.30.02.02

Selecting the noise reduction factor

Press this key.
– A low integration factor is selected (for recording fast-moving objects).
When a low integration factor is selected, the LED lights up.
– If the key is pressed again, the LED goes out. A higher integration factor is
selected (for very slow movements).

Selecting the image intensifier format

You can select a zoom format.
Press this key.
– The LED lights up when this function is selected.

Setting image reversal

Press this key.
– The image is flipped vertically.
– The LED lights up when this function is selected.
Press this key.
– The image is flipped horizontally.
– The LED lights up when this function is selected.
The image reversal is effective only on the left (live) monitor.
System Description
0
0
0
21
of 44