Siemens ARCADIS Varic Operator's Manual page 330

Documentation
Canceling camera
redirection
50
of 98
Click the camera icon with the note "redirect".
– The redirected queue is displayed.
Click Change Camera.
– The Change Camera dialog window is opened.
Click Default.
– The queue is now assigned to the original camera again. The original device
designation is again displayed in the header of the Film Task Status dialog
box.
If you shut down the system before all the film jobs in a queue have been exe-
cuted, they will remain in the queue. After rebooting the system, the film jobs are
displayed in their old status again. Exception: Active film jobs for the local printer
will be stopped and deleted and must be re-created later.
Operator Manual
SPR2-310.620.30.02.02