Selecting A Camera And Printer - Siemens ARCADIS Varic Operator's Manual

Documentation
34
of 98

Selecting a camera and printer

If you do not want to expose or print your current film job with the default camera,
then select another camera/printer for this job.
Click the Camera subtask card on the Filming task card into the foreground.
— or —
Select Film > Change Camera....
– The Change Camera and Film Size dialog box is displayed.
Select a camera or printer from the list.
Under Film Size, select the film size configured for the camera/printer.
The newly selected camera or printer will then become the default camera or
printer. These default devices will be used as long as you have not selected an-
other camera or printer.
In the Status display, you can see whether the selected camera/printer is
switched on and available.
Operator Manual
SPR2-310.620.30.02.02
0