Sending Patient Data In The Network (Option); Sending Data To A Standard Address - Siemens ARCADIS Varic Operator's Manual

ARCADIS Varic
SPR2-310.620.30.02.02

Sending patient data in the network (option)

If your system is connected to and configured in a network, you can select patient
and examination data from your local database and send them to other users in
your DICOM network whenever necessary.

Sending data to a standard address

During installation, Siemens Service can configure various network nodes
(e.g. Node 1 and Node 2) as standard addresses in the network.
Select the data that you want to send.
Press the Send to Node 1 key on the symbol keypad.
Or
Call up Transfer > Send to Node 1 or Transfer > Send to Node 2.
— or —
Click the relevant button.
– The data are sent to the selected address.
Documentation
73
of 98
0
0