Opening A Report; Editing A Report - Siemens ARCADIS Varic Operator's Manual

Opening the report for
the current patient
Opening a report for
another patient
Entering patient and
diagnostic data
ARCADIS Varic
SPR2-310.620.30.02.02

Opening a report

After starting the ESWL treatment, the Report Editor is automatically opened in
editing mode. The relevant report needs to be opened manually only for later
postprocessing.
Select Reporting > Open Report in the Viewing task card.
– The report for the current patient is opened.
If several reports exist for the patient loaded in the Viewing task card, a dialog
box is displayed in which you select the required report.
Double-click the required report in the content area of the Patient Browser.
Or
Select the report in the Patient Browser.
Select Reporting > Open Report or click the relevant button in the tool bar
of the Patient Browser.
– The selected report is opened.

Editing a report

The content area of the LithoReport is subdivided into 4 cards in which you can
add any missing information relating to the examination and treatment.
On the Patient/Diagnosis card, you enter data relating to the diagnosis and your
organization.
Click the Patient/Diagnosis card into the foreground.
– The patient data are automatically transferred from the registration.
Enter the missing data in the active fields.
Click Apply.
Examination
0
0
41
of 52