Basic Settings - Siemens ARCADIS Varic Operator's Manual

Calling up the dialog
window
Changing default
settings
ARCADIS Varic
SPR2-310.620.30.02.02

Basic settings

In the case of examinations you perform in the Basic display mode of the
Examination task card, you only have to select the body region. The medical
application area, the examination program and the operating mode are then pre-
set automatically. You can define the pre-settings for individual body regions in
the Basic Mode Configuration window.
Click this button in the Examination Set Configuration window.
– The Basic Mode Configuration window appears.
– Every line contains the current default settings for a body region.
Select the application area, examination set and operating mode for each body
region from the corresponding selection lists.
Only application areas relevant to the corresponding body region are displayed.
When the application area is changed, another matching examination set and
operating mode is automatically set as a default. This selection may also be
modified.
Click this button.
– Your changes will be saved; the dialog box closes.
Note that your changes will only become active when you close the Examination
Set Configuration window with OK.
Configuration
0
5
of 24