Menu Bar; Status Bar; Control Area - Siemens ARCADIS Varic Operator's Manual

Examination
NaviLink 2D
6
of 52

Menu bar

The user can access various functions using the menu bar. It opens when the
mouse cursor is moved to the upper edge of the monitor.

Status bar

System messages indicating the current state of the system or error messages
are displayed in the lower part of the control area.
If the NaviLink 2D option is available in the system and communication between
the navigation system and the C-arm is activated, you can see the NaviLink 2D
icon in the status bar of the Examination task card.
The navigation system sends a message to the C-arm system signaling readiness
for receiving images. The C-arm system receives the message, identifies the
sending navigation system and responds. At this moment, communication
between the two systems is activated and the NaviLink 2D icon appears in the
status bar of the Examination task card. As soon as the communication connec-
tion is terminated, the NaviLink 2D icon disappears again.

Control area

The display of the control area and the availability of functions depends on the
selected display mode.
Depending on the display mode, the following data is displayed within the control
area:
Information about the current patient
Examination settings
The current state of the ARCADIS Varic
Operator Manual
SPR2-310.620.30.02.02
0
0
0